Kolab Groupware OBS

Changes of Revision 10

guam.spec Changed

@@ -17,8 +17,10 @@
 
 %{!?_unitdir: %global _unitdir /usr/lib/systemd/system}
 
+%define lock_version() %{1}%{?_isa} = %(rpm -q --queryformat "%{VERSION}" %{1})
+
 Name:               guam
-Version:            0.8
+Version:            0.8.1
 Release:            0.20160219.git%{?dist}
 Summary:            A Smart Reverse IMAP Proxy
 
@@ -26,24 +28,10 @@
 License:            GPLv3+
 URL:                https://kolab.org/about/guam
 
-# From 3e4a3da61124e9c79b7f7f49516e6e86aa072051
-Source0:            guam-0.8.tar.gz
+Source0:            guam-%{version}.tar.gz
 
 Patch9991:          guam-0.8-T1312-set-HOME-environment-variable-in-sysvinit-script.patch
-
-Patch0001:          0001-introduce-net_iface-for-listeners.patch
-Patch0002:          0002-lets-start-keeping-a-changelog.patch
-Patch0003:          0003-enable-ipv6-by-default.patch
-Patch0004:          0004-update-this-function-for-the-data-structure-change-i.patch
-Patch0005:          0005-correct-version-of-eimap-though-this-is-like-to-bump.patch
-Patch0006:          0006-fix-typo.patch
-Patch0007:          0007-Correct-the-actual-version-back-to-0.8.patch
-Patch0008:          0008-Relax-dependency-on-lager.patch
-Patch0009:          0001-make-add_starttls_to_capabilities-work-also-on-the-f.patch
-Patch0010:          0006-correct-response-for-mplicit_tls-listeners.patch
-Patch0011:          0007-do-a-full-OK-CAPABILITY-banner-for-all-correct_hello.patch
-Patch0012:          0008-remove-AUTH-entries-put-LOGINDISABLED-if-we-put-up-a.patch
-Patch0013:          0011-switch-to-triggering-on-any-list-where-the-last-two-.patch
+Patch9992:          guam-0.8.1-relax-dependencies-set-correct-version-number.patch
 
 BuildRequires:      erlang >= 17.4
 BuildRequires:      erlang-asn1
@@ -79,11 +67,11 @@
 Requires(pre):      shadow-utils
 Requires(postun):   shadow-utils
 
-Requires:           erlang >= 17.4
-Requires:           erlang-eimap >= 0.1.2
-Requires:           erlang-goldrush
-Requires:           erlang-lager >= 2.1.0
-Requires:           erlang-lager_syslog >= 1.0.3
+Requires:           %lock_version erlang
+Requires:           %lock_version erlang-eimap
+Requires:           %lock_version erlang-goldrush
+Requires:           %lock_version erlang-lager
+Requires:           %lock_version erlang-lager_syslog
 
 %if 0%{?with_systemd}
 %if 0%{?suse_version}
@@ -112,20 +100,7 @@
 %setup -q
 
 %patch9991 -p1
-
-%patch0001 -p1
-%patch0002 -p1
-%patch0003 -p1
-%patch0004 -p1
-%patch0005 -p1
-%patch0006 -p1
-%patch0007 -p1
-%patch0008 -p1
-%patch0009 -p1
-%patch0010 -p1
-%patch0011 -p1
-%patch0012 -p1
-%patch0013 -p1
+%patch9992 -p1
 
 %build
 rebar compile
@@ -187,11 +162,12 @@
 rebar skip_deps=true eunit -v
 
 %pretrans
-pushd /opt/kolab_guam/lib
+pushd /opt/kolab_guam/lib >/dev/null 2>&1 || :
 for dir in $(ls -d */ | grep -v kolab_guam); do
     dir=$(basename ${dir})
-    rm -rf -- ${dir}
+    rm -rf -- /opt/kolab_guam/lib/${dir}
 done
+popd >/dev/null 2>&1 || :
 
 %pre
 if [ $1 == 1 ]; then
@@ -243,6 +219,9 @@
 /opt/%{realname}/
 
 %changelog
+* Tue Jul  5 2016 Jeroen van Meeuwen <vanmeeuwen@kolabsys.com> - 0.8.1-1
+- Release of version 0.8.1
+
 * Fri Jun 10 2016 Aaron Seigo <seigo@kolabsystems.com>
 - Package version 0.8

0001-introduce-net_iface-for-listeners.patch Deleted

@@ -1,89 +0,0 @@
-From f527fde7a659f67314adb161025965b242655b83 Mon Sep 17 00:00:00 2001
-From: Aaron Seigo <aseigo@kde.org>
-Date: Tue, 5 Jan 2016 10:49:13 +0100
-Subject: [PATCH 1/8] introduce net_iface for listeners
-
----
- apps/kolab_guam/src/kolab_guam_listener.erl | 17 +++++++++++++----
- docs/deployment.md                          | 16 ++++++++++++++--
- 2 files changed, 27 insertions(+), 6 deletions(-)
-
-diff --git a/apps/kolab_guam/src/kolab_guam_listener.erl b/apps/kolab_guam/src/kolab_guam_listener.erl
-index 7b7a283..c50b4b1 100644
---- a/apps/kolab_guam/src/kolab_guam_listener.erl
-+++ b/apps/kolab_guam/src/kolab_guam_listener.erl
-@@ -35,11 +35,12 @@ start_link(Name, Config) -> supervisor:start_link(?MODULE, [Name, Config]).
- %% gen_server API
- init([Name, Config]) ->
-     Host = proplists:get_value(host, Config, none),
-+    NetIface = proplists:get_value(net_iface, Config, none),
-     Port = proplists:get_value(port, Config, ?DEFAULT_IMAP_PORT),
-     ImplicitTLS = proplists:get_value(implicit_tls, Config, false),
-     TLSConfig = proplists:get_value(tls_config, Config, []),
-     Rules = proplists:get_value(rules, Config, []),
--    Options = listen_options(Host, ImplicitTLS, TLSConfig),
-+    Options = listen_options(NetIface, Host, ImplicitTLS, TLSConfig),
-     lager:info("Starting listener \"~p\" on port ~B (~p) with ~B rules", [Name, Port, Options, length(Rules)]),
-     { ok, ListenSocket } = listen(ImplicitTLS, Port, Options),
-     spawn_link(?MODULE, cleanup, [ListenSocket]),
-@@ -55,13 +56,21 @@ init([Name, Config]) ->
- imap_config(none) -> kolab_guam_sup:default_imap_server_config();
- imap_config(Backend) -> kolab_guam_sup:imap_server_config(Backend).
- 
--listen_options(none, ImplicitTLS, TLSConfig) -> default_listen_options(ImplicitTLS, TLSConfig);
--listen_options(Hostname, ImplicitTLS, TLSConfig) ->
-+listen_options(none, none, ImplicitTLS, TLSConfig) -> default_listen_options(ImplicitTLS, TLSConfig);
-+listen_options(none, Hostname, ImplicitTLS, TLSConfig) ->
-     case inet:gethostbyname(Hostname) of
-         { ok, { hostent, _HostName, _Unused, inet, _Ver, [IP] } } ->
-             [ { ip, IP } | default_listen_options(ImplicitTLS, TLSConfig) ];
-         _ ->
--            listen_options(none, ImplicitTLS, TLSConfig)
-+            listen_options(none, none, ImplicitTLS, TLSConfig)
-+    end;
-+listen_options(Iface, Hostname, ImplicitTLS, TLSConfig) ->
-+    { ok, Ifaces } = inet:getifaddrs(),
-+    case proplists:get_value(Iface, Ifaces) of
-+        undefined -> listen_options(none, Hostname, ImplicitTLS, TLSConfig);
-+        Info -> Addr = proplists:get_value(addr, Info, none),
-+                lager:info("YEAH! ~p", [Addr]),
-+                listen_options(none, Addr, ImplicitTLS, TLSConfig)
-     end.
- 
- default_listen_options(true, TLSConfig) -> [ { reuseaddr, true }, {active, once } | TLSConfig ];
-diff --git a/docs/deployment.md b/docs/deployment.md
-index 33cd450..484d0ed 100644
---- a/docs/deployment.md
-+++ b/docs/deployment.md
-@@ -84,14 +84,26 @@ contains the configuration specifics. Example:
-                 { rules, [ { filter_groupware, [] } ] },
-                 { tls_config, [ { certfile, "/etc/ssl/sample.pem" } ] }
-             ]
-+       },
-+       { default, [
-+                { net_iface, "eth0" },
-+                { port, 1993 },
-+                { imap_server, default },
-+                { implicit_tls, true },
-+                { rules, [ { filter_groupware, [] } ] },
-+                { tls_config, [ { certfile, "/etc/ssl/sample.pem" } ] }
-+            ]
-         }
-     }
- 
- The host entry is optional, and is used to bind the connection to a specific
--network interface. Leaving it empty will cause Guam to bind to the port accross
-+network interface by ip address. Alternatively, the net_iface may be defined and
-+guam will attempt to bind to an address on that network device. net_iface overrides
-+host, though host will be used as a fallback if net_iface does not produce a network
-+interface. Leaving host and net_iface empty will cause Guam to bind to the port accross
- all network interfaces available to it.
- 
--port defines the port it is listening on.
-+port defines the port the listener is active on.
- 
- imap_server refers to the entry in the imap_servers block. If not provided, the
- default entry in the imap_servers configuration is used.
--- 
-2.5.5
-

0001-make-add_starttls_to_capabilities-work-also-on-the-f.patch Deleted

@@ -1,37 +0,0 @@
-From f1df1fe2766912652a57c4c2cc1706e8eecf529f Mon Sep 17 00:00:00 2001
-From: Aaron Seigo <aseigo@kde.org>
-Date: Tue, 28 Jun 2016 08:47:19 +0200
-Subject: [PATCH] make add_starttls_to_capabilities work also on the first
- hello response
-
-.. which does not have a CAPABILITIES clause. do try to be put it after the
-the IMAP4v1 clause, though, for neatness
----
- apps/kolab_guam/src/kolab_guam_session.erl | 11 ++++++++++-
- 1 file changed, 10 insertions(+), 1 deletion(-)
-
-diff --git a/apps/kolab_guam/src/kolab_guam_session.erl b/apps/kolab_guam/src/kolab_guam_session.erl
-index 9439018..1f3869b 100644
---- a/apps/kolab_guam/src/kolab_guam_session.erl
-+++ b/apps/kolab_guam/src/kolab_guam_session.erl
-@@ -296,7 +296,16 @@ ensure_hello_has_starttls(ServerResponse) ->
- 
- add_starttls_to_capabilities(ServerHello) ->
-     case binary:match(ServerHello, <<"CAPABILITY ">>) of
--        nomatch -> ServerHello;
-+        nomatch -> add_starttls_after_imap4_atom(ServerHello);
-+        { Start, End } ->
-+            Prefix = binary:part(ServerHello, 0, Start + End),
-+            Suffix = binary:part(ServerHello, Start + End, size(ServerHello) - Start - End),
-+            <<Prefix/binary, "STARTTLS ", Suffix/binary>>
-+    end.
-+
-+add_starttls_after_imap4_atom(ServerHello) ->
-+    case binary:match(ServerHello, <<"IMAP4rev1 ">>) of
-+        nomatch -> <<"STARTTLS ", ServerHello/binary>>;
-         { Start, End } ->
-             Prefix = binary:part(ServerHello, 0, Start + End),
-             Suffix = binary:part(ServerHello, Start + End, size(ServerHello) - Start - End),
--- 
-2.5.5
-

0002-lets-start-keeping-a-changelog.patch Deleted

@@ -1,44 +0,0 @@
-From fde09ae6dd5b38642d8712893f39066d8f4f2091 Mon Sep 17 00:00:00 2001
-From: Aaron Seigo <aseigo@kde.org>
-Date: Mon, 13 Jun 2016 10:28:02 +0200
-Subject: [PATCH 2/8] lets start keeping a changelog
-
----
- CHANGELOG.md | 25 +++++++++++++++++++++++++
- 1 file changed, 25 insertions(+)
- create mode 100644 CHANGELOG.md
-
-diff --git a/CHANGELOG.md b/CHANGELOG.md
-new file mode 100644
-index 0000000..5f04931
---- /dev/null
-+++ b/CHANGELOG.md
-@@ -0,0 +1,25 @@
-+# Changelog
-+All notable changes to this project will be documented in this file.
-+
-+This project adheres to [Semantic Versioning](http://semver.org/).
-+
-+## [Unreleased]
-+### Added
-+- bind to a network interface (rather than an IP/host) with net_iface
-+### Changed
-+- upgraded build to rebar3
-+### Deprecated
-+### Removed
-+### Fixed
-+### Security
-+
-+
-+## [0.8.0] - 2016-06-08
-+### Added
-+- systemd service module
-+- sysv init script
-+### Changed
-+- Upgraded eimap to 0.2.4
-+### Fixed
-+- Support more variations of the LIST command args in the filter_groupware rule
-+
--- 
-2.5.5
-

0003-enable-ipv6-by-default.patch Deleted

@@ -1,51 +0,0 @@
-From 86b9e66beabe4b61e7d091b8df7ad30e293c0cca Mon Sep 17 00:00:00 2001
-From: Aaron Seigo <aseigo@kde.org>
-Date: Mon, 20 Jun 2016 12:20:06 +0200
-Subject: [PATCH 3/8] enable ipv6 by default
-
-Summary:
-Set the listen socket to ipv6 mode always
-
-Tested and works with ipv4 addresses as well
-
-Reviewers: #guam_developers, vanmeeuwen
-
-Reviewed By: vanmeeuwen
-
-Differential Revision: https://git.kolab.org/D185
----
- apps/kolab_guam/src/kolab_guam_listener.erl | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
-diff --git a/apps/kolab_guam/src/kolab_guam_listener.erl b/apps/kolab_guam/src/kolab_guam_listener.erl
-index c50b4b1..ebb0c99 100644
---- a/apps/kolab_guam/src/kolab_guam_listener.erl
-+++ b/apps/kolab_guam/src/kolab_guam_listener.erl
-@@ -56,6 +56,7 @@ init([Name, Config]) ->
- imap_config(none) -> kolab_guam_sup:default_imap_server_config();
- imap_config(Backend) -> kolab_guam_sup:imap_server_config(Backend).
- 
-+-spec listen_options(Iface :: string(), Hostname :: string(), ImplicitTLS :: boolean(), TLSConfig :: list()) -> list().
- listen_options(none, none, ImplicitTLS, TLSConfig) -> default_listen_options(ImplicitTLS, TLSConfig);
- listen_options(none, Hostname, ImplicitTLS, TLSConfig) ->
-     case inet:gethostbyname(Hostname) of
-@@ -69,12 +70,13 @@ listen_options(Iface, Hostname, ImplicitTLS, TLSConfig) ->
-     case proplists:get_value(Iface, Ifaces) of
-         undefined -> listen_options(none, Hostname, ImplicitTLS, TLSConfig);
-         Info -> Addr = proplists:get_value(addr, Info, none),
--                lager:info("YEAH! ~p", [Addr]),
-+                %lager:info("YEAH! ~p", [Addr]),
-                 listen_options(none, Addr, ImplicitTLS, TLSConfig)
-     end.
- 
--default_listen_options(true, TLSConfig) -> [ { reuseaddr, true }, {active, once } | TLSConfig ];
--default_listen_options(_ImplicitTLS, _Config) ->  [ { active, once }, { reuseaddr, true } ].
-+default_listen_options(true, TLSConfig) -> default_listen_options() ++ TLSConfig;
-+default_listen_options(_ImplicitTLS, _Config) -> default_listen_options().
-+default_listen_options() -> [ { reuseaddr, true }, {active, once }, inet6 ].
- 
- create_initial_listeners(PID) when is_pid(PID) ->
-     lager:debug("Creating session pool for listener ~p", [PID]),
--- 
-2.5.5
-

0004-update-this-function-for-the-data-structure-change-i.patch Deleted

@@ -1,27 +0,0 @@
-From 130349adeef36dcbcf65e5435d16e66974f60804 Mon Sep 17 00:00:00 2001
-From: Aaron Seigo <aseigo@kde.org>
-Date: Mon, 20 Jun 2016 13:31:59 +0200
-Subject: [PATCH 4/8] update this function for the data structure change in
- eimap 0.2
-
----
- apps/kolab_guam/src/kolab_guam_session.erl | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
-diff --git a/apps/kolab_guam/src/kolab_guam_session.erl b/apps/kolab_guam/src/kolab_guam_session.erl
-index 60a28cb..69e239c 100644
---- a/apps/kolab_guam/src/kolab_guam_session.erl
-+++ b/apps/kolab_guam/src/kolab_guam_session.erl
-@@ -303,7 +303,8 @@ add_starttls_to_capabilities(ServerHello) ->
-             <<Prefix/binary, "STARTTLS ", Suffix/binary>>
-     end.
- 
--ensure_hello_does_not_have_starttls(ServerHello) ->
-+ensure_hello_does_not_have_starttls(ServerResponse) ->
-+    ServerHello = proplists:get_value(capabilities, ServerResponse, <<>>),
-     case binary:match(ServerHello, <<"STARTTLS">>) of
-         nomatch -> ServerHello;
-         { Start, End } ->
--- 
-2.5.5
-

0005-correct-version-of-eimap-though-this-is-like-to-bump.patch Deleted

@@ -1,26 +0,0 @@
-From 1341368e92efcda4d98d0a12a61ce14a102c324b Mon Sep 17 00:00:00 2001
-From: Aaron Seigo <aseigo@kde.org>
-Date: Mon, 20 Jun 2016 16:57:34 +0200
-Subject: [PATCH 5/8] correct version of eimap (though this is like to bump
- again to 0.2.5)
-
----
- rebar.config | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/rebar.config b/rebar.config
-index bd55f4e..3dafb5a 100644
---- a/rebar.config
-+++ b/rebar.config
-@@ -5,7 +5,7 @@
- { deps, [
-     { lager, "(2.0|2.1|2.2).*", { git, "git://github.com/basho/lager.git", { tag, "2.2.0" } } },
-     { lager_syslog, "2.*", { git, "git://github.com/basho/lager_syslog.git", { tag, "2.1.3" } } },
--    { eimap, ".*", { git, "https://git.kolab.org/diffusion/EI/eimap.git", { tag, "0.2.2" } } }
-+    { eimap, ".*", { git, "https://git.kolab.org/diffusion/EI/eimap.git", { tag, "0.2.4" } } }
-     %% pull in the proper version of meck before jobs 0.3 gets around to pulling in the wrong version
-    ]
- }.
--- 
-2.5.5
-

0006-correct-response-for-mplicit_tls-listeners.patch Deleted

@@ -1,58 +0,0 @@
-From 18bd1abb8a1221b16b2ec53641b07d8ef49130ea Mon Sep 17 00:00:00 2001
-From: Aaron Seigo <aseigo@kde.org>
-Date: Fri, 1 Jul 2016 12:40:04 +0200
-Subject: [PATCH 6/8] correct response for mplicit_tls listeners
-
----
- apps/kolab_guam/src/kolab_guam_session.erl | 20 ++++++++++++++------
- 1 file changed, 14 insertions(+), 6 deletions(-)
-
-diff --git a/apps/kolab_guam/src/kolab_guam_session.erl b/apps/kolab_guam/src/kolab_guam_session.erl
-index 1f3869b..df195a1 100644
---- a/apps/kolab_guam/src/kolab_guam_session.erl
-+++ b/apps/kolab_guam/src/kolab_guam_session.erl
-@@ -71,8 +71,8 @@ handle_info({ tcp, Socket, Data }, #state{ client_tls_active = false } = State)
- handle_info({ ssl, Socket, Data }, State) ->
-     %lager:debug("Data coming in from client over SSL, ~p", [Data]),
-     process_client_data(Socket, Data, State);
--handle_info({ server_hello, ServerHello }, #state{ imap_session = ImapSession, tls_config = TLSConfig, socket = Socket, client_tls_active = TLSActive, deflator = Deflator } = State) ->
--    CorrectedHello = correct_hello(TLSActive, TLSConfig, ServerHello),
-+handle_info({ server_hello, ServerHello }, #state{ imap_session = ImapSession, tls_config = TLSConfig, socket = Socket, client_implicit_tls = ImplicitTLS, client_tls_active = TLSActive, deflator = Deflator } = State) ->
-+    CorrectedHello = correct_hello(TLSActive, ImplicitTLS, TLSConfig, ServerHello),
-     eimap:start_passthrough(ImapSession, self()),
-     relay_response(Socket, postprocess_server_data(Deflator, <<CorrectedHello/binary, "\r\n">>), TLSActive),
-     { noreply, State };
-@@ -275,18 +275,26 @@ start_client_compression(Socket, TLS, Tag) ->
- set_socket_active(true, Socket) -> ssl:setopts(Socket, [{ active, once }]);
- set_socket_active(_, Socket) -> inet:setopts(Socket, [{ active, once }]).
- 
---spec correct_hello(TLSActive :: true | false, TlSConfig :: [] | list(), ServerHello :: binary()) -> CorrectedHello :: binary().
--correct_hello(true, _TLSConfig, ServerHello) ->
-+-spec correct_hello(TLSActive :: true | false, ImplicitTLS :: true | false, TlSConfig :: [] | list(), ServerHello :: binary()) -> CorrectedHello :: binary().
-+correct_hello(true, true, _TLSConfig, ServerHello) ->
-+    % the connection is already secured, so don't advertise starttls to the client
-+    build_hello_for_implicit_tls(ServerHello);
-+correct_hello(true, _ImplicitTLS, _TLSConfig, ServerHello) ->
-     % the connection is already secured, so don't advertise starttls to the client
-     ensure_hello_does_not_have_starttls(ServerHello);
--correct_hello(_TLSActive, [], ServerHello) ->
-+correct_hello(_TLSActive, _ImplicitTLS, [], ServerHello) ->
-     % guam does not have a TLS config and so can not provide TLS to the client
-     ensure_hello_does_not_have_starttls(ServerHello);
--correct_hello(_TLSActive, _TLSConfig, ServerHello) ->
-+correct_hello(_TLSActive, _ImplicitTLS, _TLSConfig, ServerHello) ->
-     % guam has a TLS config, and it is not currently active, so make sure to include
-     % STARTTLS in our response regardless of what the backend says
-     ensure_hello_has_starttls(ServerHello).
- 
-+build_hello_for_implicit_tls(ServerResponse) ->
-+    NoTLSCapabilities = ensure_hello_does_not_have_starttls(ServerResponse),
-+    ServerIdent = proplists:get_value(server_id, ServerResponse, <<>>),
-+    <<"* OK [CAPABILITIES ", NoTLSCapabilities/binary, "] ", ServerIdent/binary>>.
-+
- ensure_hello_has_starttls(ServerResponse) ->
-     ServerHello = proplists:get_value(capabilities, ServerResponse, <<>>),
-     case binary:match(ServerHello, <<"STARTTLS">>) of
--- 
-2.5.5
-

0006-fix-typo.patch Deleted

@@ -1,25 +0,0 @@
-From 06f22152fbb0daf5b1d5cc471cf5de5c587246f7 Mon Sep 17 00:00:00 2001
-From: Aaron Seigo <aseigo@kde.org>
-Date: Mon, 20 Jun 2016 16:57:58 +0200
-Subject: [PATCH 6/8] fix typo
-
----
- apps/kolab_guam/src/kolab_guam_session.erl | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/apps/kolab_guam/src/kolab_guam_session.erl b/apps/kolab_guam/src/kolab_guam_session.erl
-index 69e239c..9439018 100644
---- a/apps/kolab_guam/src/kolab_guam_session.erl
-+++ b/apps/kolab_guam/src/kolab_guam_session.erl
-@@ -282,7 +282,7 @@ correct_hello(true, _TLSConfig, ServerHello) ->
- correct_hello(_TLSActive, [], ServerHello) ->
-     % guam does not have a TLS config and so can not provide TLS to the client
-     ensure_hello_does_not_have_starttls(ServerHello);
--correct_hello(_TLSAcive, _TLSConfig, ServerHello) ->
-+correct_hello(_TLSActive, _TLSConfig, ServerHello) ->
-     % guam has a TLS config, and it is not currently active, so make sure to include
-     % STARTTLS in our response regardless of what the backend says
-     ensure_hello_has_starttls(ServerHello).
--- 
-2.5.5
-

0007-Correct-the-actual-version-back-to-0.8.patch Deleted

0007-do-a-full-OK-CAPABILITY-banner-for-all-correct_hello.patch Deleted

@@ -1,62 +0,0 @@
-From 75ce99f2226438cab4cf57cb8b7dbbe6e4d22885 Mon Sep 17 00:00:00 2001
-From: Aaron Seigo <aseigo@kde.org>
-Date: Fri, 1 Jul 2016 12:44:09 +0200
-Subject: [PATCH 7/8] do a full "* OK [CAPABILITY" banner for all correct_hello
- paths
-
----
- apps/kolab_guam/src/kolab_guam_session.erl | 25 +++++++++++--------------
- 1 file changed, 11 insertions(+), 14 deletions(-)
-
-diff --git a/apps/kolab_guam/src/kolab_guam_session.erl b/apps/kolab_guam/src/kolab_guam_session.erl
-index df195a1..fb9c72b 100644
---- a/apps/kolab_guam/src/kolab_guam_session.erl
-+++ b/apps/kolab_guam/src/kolab_guam_session.erl
-@@ -73,8 +73,10 @@ handle_info({ ssl, Socket, Data }, State) ->
-     process_client_data(Socket, Data, State);
- handle_info({ server_hello, ServerHello }, #state{ imap_session = ImapSession, tls_config = TLSConfig, socket = Socket, client_implicit_tls = ImplicitTLS, client_tls_active = TLSActive, deflator = Deflator } = State) ->
-     CorrectedHello = correct_hello(TLSActive, ImplicitTLS, TLSConfig, ServerHello),
-+    ServerIdent = proplists:get_value(server_id, ServerHello, <<>>),
-+    FullGreeting = <<"* OK [CAPABILITIES ", CorrectedHello/binary, "] ", ServerIdent/binary, "\r\n">>,
-     eimap:start_passthrough(ImapSession, self()),
--    relay_response(Socket, postprocess_server_data(Deflator, <<CorrectedHello/binary, "\r\n">>), TLSActive),
-+    relay_response(Socket, postprocess_server_data(Deflator, FullGreeting), TLSActive),
-     { noreply, State };
- handle_info({ { rule_data, Module, ResponseToken }, Data }, #state{ rules_active = ActiveRules } = State) ->
-     %lager:debug("Got back data requested by rule ~p: ~p", [Module, Data]),
-@@ -276,24 +278,19 @@ set_socket_active(true, Socket) -> ssl:setopts(Socket, [{ active, once }]);
- set_socket_active(_, Socket) -> inet:setopts(Socket, [{ active, once }]).
- 
- -spec correct_hello(TLSActive :: true | false, ImplicitTLS :: true | false, TlSConfig :: [] | list(), ServerHello :: binary()) -> CorrectedHello :: binary().
--correct_hello(true, true, _TLSConfig, ServerHello) ->
-+correct_hello(true, true, _TLSConfig, ServerResponse) ->
-     % the connection is already secured, so don't advertise starttls to the client
--    build_hello_for_implicit_tls(ServerHello);
--correct_hello(true, _ImplicitTLS, _TLSConfig, ServerHello) ->
-+    ensure_hello_does_not_have_starttls(ServerResponse);
-+correct_hello(true, _ImplicitTLS, _TLSConfig, ServerResponse) ->
-     % the connection is already secured, so don't advertise starttls to the client
--    ensure_hello_does_not_have_starttls(ServerHello);
--correct_hello(_TLSActive, _ImplicitTLS, [], ServerHello) ->
-+    ensure_hello_does_not_have_starttls(ServerResponse);
-+correct_hello(_TLSActive, _ImplicitTLS, [], ServerResponse) ->
-     % guam does not have a TLS config and so can not provide TLS to the client
--    ensure_hello_does_not_have_starttls(ServerHello);
--correct_hello(_TLSActive, _ImplicitTLS, _TLSConfig, ServerHello) ->
-+    ensure_hello_does_not_have_starttls(ServerResponse);
-+correct_hello(_TLSActive, _ImplicitTLS, _TLSConfig, ServerResponse) ->
-     % guam has a TLS config, and it is not currently active, so make sure to include
-     % STARTTLS in our response regardless of what the backend says
--    ensure_hello_has_starttls(ServerHello).
--
--build_hello_for_implicit_tls(ServerResponse) ->
--    NoTLSCapabilities = ensure_hello_does_not_have_starttls(ServerResponse),
--    ServerIdent = proplists:get_value(server_id, ServerResponse, <<>>),
--    <<"* OK [CAPABILITIES ", NoTLSCapabilities/binary, "] ", ServerIdent/binary>>.
-+    ensure_hello_has_starttls(ServerResponse).
- 
- ensure_hello_has_starttls(ServerResponse) ->
-     ServerHello = proplists:get_value(capabilities, ServerResponse, <<>>),
--- 
-2.5.5
-

0008-Relax-dependency-on-lager.patch Deleted

0008-remove-AUTH-entries-put-LOGINDISABLED-if-we-put-up-a.patch Deleted

@@ -1,63 +0,0 @@
-From 4cb9fd2e94f7746e5ec05f0cd3c1c7cca895efa3 Mon Sep 17 00:00:00 2001
-From: Aaron Seigo <aseigo@kde.org>
-Date: Fri, 1 Jul 2016 13:16:16 +0200
-Subject: [PATCH 8/8] remove AUTH= entries, put LOGINDISABLED if we put up a
- STARTTLS
-
----
- apps/kolab_guam/src/kolab_guam_session.erl | 28 ++++++++++++++++++++++++++--
- 1 file changed, 26 insertions(+), 2 deletions(-)
-
-diff --git a/apps/kolab_guam/src/kolab_guam_session.erl b/apps/kolab_guam/src/kolab_guam_session.erl
-index fb9c72b..79114b1 100644
---- a/apps/kolab_guam/src/kolab_guam_session.erl
-+++ b/apps/kolab_guam/src/kolab_guam_session.erl
-@@ -305,7 +305,8 @@ add_starttls_to_capabilities(ServerHello) ->
-         { Start, End } ->
-             Prefix = binary:part(ServerHello, 0, Start + End),
-             Suffix = binary:part(ServerHello, Start + End, size(ServerHello) - Start - End),
--            <<Prefix/binary, "STARTTLS ", Suffix/binary>>
-+            CorrectHello = <<Prefix/binary, "STARTTLS ", Suffix/binary>>,
-+            remove_auth_offers(CorrectHello)
-     end.
- 
- add_starttls_after_imap4_atom(ServerHello) ->
-@@ -314,7 +315,8 @@ add_starttls_after_imap4_atom(ServerHello) ->
-         { Start, End } ->
-             Prefix = binary:part(ServerHello, 0, Start + End),
-             Suffix = binary:part(ServerHello, Start + End, size(ServerHello) - Start - End),
--            <<Prefix/binary, "STARTTLS ", Suffix/binary>>
-+            CorrectHello = <<Prefix/binary, "STARTTLS ", Suffix/binary>>,
-+            remove_auth_offers(CorrectHello)
-     end.
- 
- ensure_hello_does_not_have_starttls(ServerResponse) ->
-@@ -327,3 +329,25 @@ ensure_hello_does_not_have_starttls(ServerResponse) ->
-             <<Prefix/binary, Suffix/binary>>
-     end.
- 
-+remove_auth_offers(ServerHello) ->
-+    case binary:match(ServerHello, <<"AUTH=">>) of
-+        nomatch -> ensure_advertise_login_disabled(ServerHello);
-+        { Start, End } ->
-+            Prefix = binary:part(ServerHello, 0, Start),
-+            Suffix =
-+            case binary:match(ServerHello, <<" ">>, [{ scope, { Start, size(ServerHello) - Start } }]) of
-+                nomatch ->
-+                    %% end of the line, so no suffix
-+                    <<>>;
-+                { SpaceStart, SpaceEnd } ->
-+                    binary:part(ServerHello, SpaceStart + SpaceEnd, size(ServerHello) - SpaceStart - SpaceEnd)
-+            end,
-+            remove_auth_offers(<<Prefix/binary, Suffix/binary>>)
-+    end.
-+
-+ensure_advertise_login_disabled(ServerHello) ->
-+    case binary:match(ServerHello, <<"LOGINDISABLED">>) of
-+        nomatch -> <<ServerHello/binary, " LOGINDISABLED">>;
-+        _ -> ServerHello
-+    end.
-+
--- 
-2.5.5
-

0011-switch-to-triggering-on-any-list-where-the-last-two-.patch Deleted

@@ -1,61 +0,0 @@
-From 7a96caca1d8f8db6f6d7bd625867d5eb292694f0 Mon Sep 17 00:00:00 2001
-From: Aaron Seigo <aseigo@kde.org>
-Date: Mon, 4 Jul 2016 09:47:46 +0200
-Subject: [PATCH 11/11] switch to triggering on any list where the last two
- bytes are not ""
-
-if the suffix of the command is "" that means "this is not really a LIST
-command, rather I am wanting the root and separator" .. otherwise known
-as IMAP's poorly considered attempt at a poor man's NAMESPACE command
----
- .../src/rules/kolab_guam_rule_filter_groupware.erl       | 16 +++++++++-------
- 1 file changed, 9 insertions(+), 7 deletions(-)
-
-diff --git a/apps/kolab_guam/src/rules/kolab_guam_rule_filter_groupware.erl b/apps/kolab_guam/src/rules/kolab_guam_rule_filter_groupware.erl
-index a383ad9..49211aa 100644
---- a/apps/kolab_guam/src/rules/kolab_guam_rule_filter_groupware.erl
-+++ b/apps/kolab_guam/src/rules/kolab_guam_rule_filter_groupware.erl
-@@ -27,14 +27,12 @@ new(_Config) -> #state { blacklist = undefined }.
- applies(_ConnectionDetails, Buffer, State) ->
-     { _Tag, Command, Data } = eimap_utils:split_command_into_components(Buffer),
-     %lager:debug("********** Checking ...~n    Command: ~s ~s", [Command, Data]),
--    { apply_if_id_matches(Command, Data, State#state.trigger_commands), State }.
-+    { apply_if_id_matches(Command, Data, State), State }.
- 
- apply_to_client_message(ImapSession, Buffer, State) ->
-     { Tag, Command, Data } = eimap_utils:split_command_into_components(Buffer),
-     { Active, StateTag }=
--    case lists:any(fun(T) -> (Command =:= T) andalso
--                             ((binary:match(Data, <<"*">>) =/= nomatch) orelse (binary:match(Data, <<"%">>) =/= nomatch)) end,
--                   State#state.trigger_commands) of
-+    case is_triggering_command(Command, Data, State) of
-         true -> fetch_metadata(ImapSession, State), { true, Tag };
-         _ -> { false, <<>> }
-     end,
-@@ -55,16 +53,20 @@ imap_data(blacklist, Response, State) ->
-     State#state{ blacklist = Blacklist }.
- 
- %%PRIVATE
-+is_triggering_command(Command, Data, #state{ trigger_commands = TriggerCommands }) ->
-+    lists:any(fun(T) -> (Command =:= T) andalso (binary:longest_common_suffix([Data, <<"\"\"">>]) =:= 2) end,
-+              TriggerCommands).
-+
- 
- fetch_metadata(none, #state{ blacklist = undefined }) -> ok;
- fetch_metadata(ImapSession, #state{ blacklist = undefined }) ->
-     eimap:get_folder_metadata(ImapSession, self(), { rule_data, ?MODULE, blacklist }, "*", ["/shared/vendor/kolab/folder-type"]);
- fetch_metadata(_ImapSession, _State) -> ok.
- 
--apply_if_id_matches(<<"ID">>, Data, _TriggerCommands) ->
-+apply_if_id_matches(<<"ID">>, Data, _State) ->
-     apply_if_found_kolab(binary:match(Data, <<"/Kolab">>));
--apply_if_id_matches(Command, _Data, TriggerCommands) ->
--    case lists:any(fun(T) -> Command =:= T end, TriggerCommands) of
-+apply_if_id_matches(Command, Data, State) ->
-+    case is_triggering_command(Command, Data, State) of
-         true -> true;
-         _ -> notyet
-     end.
--- 
-2.5.5
-

guam-0.8-debian-concat.patch Deleted

@@ -1,225 +0,0 @@
-diff -ur guam-0.8.orig/apps/kolab_guam/src/kolab_guam_listener.erl guam-0.8/apps/kolab_guam/src/kolab_guam_listener.erl
---- guam-0.8.orig/apps/kolab_guam/src/kolab_guam_listener.erl	2016-06-08 14:18:58.000000000 +0200
-+++ guam-0.8/apps/kolab_guam/src/kolab_guam_listener.erl	2016-07-01 13:33:11.784314048 +0200
-@@ -35,11 +35,12 @@
- %% gen_server API
- init([Name, Config]) ->
-     Host = proplists:get_value(host, Config, none),
-+    NetIface = proplists:get_value(net_iface, Config, none),
-     Port = proplists:get_value(port, Config, ?DEFAULT_IMAP_PORT),
-     ImplicitTLS = proplists:get_value(implicit_tls, Config, false),
-     TLSConfig = proplists:get_value(tls_config, Config, []),
-     Rules = proplists:get_value(rules, Config, []),
--    Options = listen_options(Host, ImplicitTLS, TLSConfig),
-+    Options = listen_options(NetIface, Host, ImplicitTLS, TLSConfig),
-     lager:info("Starting listener \"~p\" on port ~B (~p) with ~B rules", [Name, Port, Options, length(Rules)]),
-     { ok, ListenSocket } = listen(ImplicitTLS, Port, Options),
-     spawn_link(?MODULE, cleanup, [ListenSocket]),
-@@ -55,17 +56,27 @@
- imap_config(none) -> kolab_guam_sup:default_imap_server_config();
- imap_config(Backend) -> kolab_guam_sup:imap_server_config(Backend).
- 
--listen_options(none, ImplicitTLS, TLSConfig) -> default_listen_options(ImplicitTLS, TLSConfig);
--listen_options(Hostname, ImplicitTLS, TLSConfig) ->
-+-spec listen_options(Iface :: string(), Hostname :: string(), ImplicitTLS :: boolean(), TLSConfig :: list()) -> list().
-+listen_options(none, none, ImplicitTLS, TLSConfig) -> default_listen_options(ImplicitTLS, TLSConfig);
-+listen_options(none, Hostname, ImplicitTLS, TLSConfig) ->
-     case inet:gethostbyname(Hostname) of
-         { ok, { hostent, _HostName, _Unused, inet, _Ver, [IP] } } ->
-             [ { ip, IP } | default_listen_options(ImplicitTLS, TLSConfig) ];
-         _ ->
--            listen_options(none, ImplicitTLS, TLSConfig)
-+            listen_options(none, none, ImplicitTLS, TLSConfig)
-+    end;
-+listen_options(Iface, Hostname, ImplicitTLS, TLSConfig) ->
-+    { ok, Ifaces } = inet:getifaddrs(),
-+    case proplists:get_value(Iface, Ifaces) of
-+        undefined -> listen_options(none, Hostname, ImplicitTLS, TLSConfig);
-+        Info -> Addr = proplists:get_value(addr, Info, none),
-+                %lager:info("YEAH! ~p", [Addr]),
-+                listen_options(none, Addr, ImplicitTLS, TLSConfig)
-     end.
- 
--default_listen_options(true, TLSConfig) -> [ { reuseaddr, true }, {active, once } | TLSConfig ];
--default_listen_options(_ImplicitTLS, _Config) ->  [ { active, once }, { reuseaddr, true } ].
-+default_listen_options(true, TLSConfig) -> default_listen_options() ++ TLSConfig;
-+default_listen_options(_ImplicitTLS, _Config) -> default_listen_options().
-+default_listen_options() -> [ { reuseaddr, true }, {active, once }, inet6 ].
- 
- create_initial_listeners(PID) when is_pid(PID) ->
-     lager:debug("Creating session pool for listener ~p", [PID]),
-diff -ur guam-0.8.orig/apps/kolab_guam/src/kolab_guam_session.erl guam-0.8/apps/kolab_guam/src/kolab_guam_session.erl
---- guam-0.8.orig/apps/kolab_guam/src/kolab_guam_session.erl	2016-06-08 14:18:58.000000000 +0200
-+++ guam-0.8/apps/kolab_guam/src/kolab_guam_session.erl	2016-07-01 13:34:12.008992665 +0200
-@@ -71,10 +71,12 @@
- handle_info({ ssl, Socket, Data }, State) ->
-     %lager:debug("Data coming in from client over SSL, ~p", [Data]),
-     process_client_data(Socket, Data, State);
--handle_info({ server_hello, ServerHello }, #state{ imap_session = ImapSession, tls_config = TLSConfig, socket = Socket, client_tls_active = TLSActive, deflator = Deflator } = State) ->
--    CorrectedHello = correct_hello(TLSActive, TLSConfig, ServerHello),
-+handle_info({ server_hello, ServerHello }, #state{ imap_session = ImapSession, tls_config = TLSConfig, socket = Socket, client_implicit_tls = ImplicitTLS, client_tls_active = TLSActive, deflator = Deflator } = State) ->
-+    CorrectedHello = correct_hello(TLSActive, ImplicitTLS, TLSConfig, ServerHello),
-+    ServerIdent = proplists:get_value(server_id, ServerHello, <<>>),
-+    FullGreeting = <<"* OK [CAPABILITIES ", CorrectedHello/binary, "] ", ServerIdent/binary, "\r\n">>,
-     eimap:start_passthrough(ImapSession, self()),
--    relay_response(Socket, postprocess_server_data(Deflator, <<CorrectedHello/binary, "\r\n">>), TLSActive),
-+    relay_response(Socket, postprocess_server_data(Deflator, FullGreeting), TLSActive),
-     { noreply, State };
- handle_info({ { rule_data, Module, ResponseToken }, Data }, #state{ rules_active = ActiveRules } = State) ->
-     %lager:debug("Got back data requested by rule ~p: ~p", [Module, Data]),
-@@ -275,17 +277,20 @@
- set_socket_active(true, Socket) -> ssl:setopts(Socket, [{ active, once }]);
- set_socket_active(_, Socket) -> inet:setopts(Socket, [{ active, once }]).
- 
---spec correct_hello(TLSActive :: true | false, TlSConfig :: [] | list(), ServerHello :: binary()) -> CorrectedHello :: binary().
--correct_hello(true, _TLSConfig, ServerHello) ->
-+-spec correct_hello(TLSActive :: true | false, ImplicitTLS :: true | false, TlSConfig :: [] | list(), ServerHello :: binary()) -> CorrectedHello :: binary().
-+correct_hello(true, true, _TLSConfig, ServerResponse) ->
-     % the connection is already secured, so don't advertise starttls to the client
--    ensure_hello_does_not_have_starttls(ServerHello);
--correct_hello(_TLSActive, [], ServerHello) ->
-+    ensure_hello_does_not_have_starttls(ServerResponse);
-+correct_hello(true, _ImplicitTLS, _TLSConfig, ServerResponse) ->
-+    % the connection is already secured, so don't advertise starttls to the client
-+    ensure_hello_does_not_have_starttls(ServerResponse);
-+correct_hello(_TLSActive, _ImplicitTLS, [], ServerResponse) ->
-     % guam does not have a TLS config and so can not provide TLS to the client
--    ensure_hello_does_not_have_starttls(ServerHello);
--correct_hello(_TLSAcive, _TLSConfig, ServerHello) ->
-+    ensure_hello_does_not_have_starttls(ServerResponse);
-+correct_hello(_TLSActive, _ImplicitTLS, _TLSConfig, ServerResponse) ->
-     % guam has a TLS config, and it is not currently active, so make sure to include
-     % STARTTLS in our response regardless of what the backend says
--    ensure_hello_has_starttls(ServerHello).
-+    ensure_hello_has_starttls(ServerResponse).
- 
- ensure_hello_has_starttls(ServerResponse) ->
-     ServerHello = proplists:get_value(capabilities, ServerResponse, <<>>),
-@@ -296,14 +301,26 @@
- 
- add_starttls_to_capabilities(ServerHello) ->
-     case binary:match(ServerHello, <<"CAPABILITY ">>) of
--        nomatch -> ServerHello;
-+        nomatch -> add_starttls_after_imap4_atom(ServerHello);
-+        { Start, End } ->
-+            Prefix = binary:part(ServerHello, 0, Start + End),
-+            Suffix = binary:part(ServerHello, Start + End, size(ServerHello) - Start - End),
-+            CorrectHello = <<Prefix/binary, "STARTTLS ", Suffix/binary>>,
-+            remove_auth_offers(CorrectHello)
-+    end.
-+
-+add_starttls_after_imap4_atom(ServerHello) ->
-+    case binary:match(ServerHello, <<"IMAP4rev1 ">>) of
-+        nomatch -> <<"STARTTLS ", ServerHello/binary>>;
-         { Start, End } ->
-             Prefix = binary:part(ServerHello, 0, Start + End),
-             Suffix = binary:part(ServerHello, Start + End, size(ServerHello) - Start - End),
--            <<Prefix/binary, "STARTTLS ", Suffix/binary>>
-+            CorrectHello = <<Prefix/binary, "STARTTLS ", Suffix/binary>>,
-+            remove_auth_offers(CorrectHello)
-     end.
- 
--ensure_hello_does_not_have_starttls(ServerHello) ->
-+ensure_hello_does_not_have_starttls(ServerResponse) ->
-+    ServerHello = proplists:get_value(capabilities, ServerResponse, <<>>),
-     case binary:match(ServerHello, <<"STARTTLS">>) of
-         nomatch -> ServerHello;
-         { Start, End } ->
-@@ -312,3 +329,25 @@
-             <<Prefix/binary, Suffix/binary>>
-     end.
- 
-+remove_auth_offers(ServerHello) ->
-+    case binary:match(ServerHello, <<"AUTH=">>) of
-+        nomatch -> ensure_advertise_login_disabled(ServerHello);
-+        { Start, End } ->
-+            Prefix = binary:part(ServerHello, 0, Start),
-+            Suffix =
-+            case binary:match(ServerHello, <<" ">>, [{ scope, { Start, size(ServerHello) - Start } }]) of
-+                nomatch ->
-+                    %% end of the line, so no suffix
-+                    <<>>;
-+                { SpaceStart, SpaceEnd } ->
-+                    binary:part(ServerHello, SpaceStart + SpaceEnd, size(ServerHello) - SpaceStart - SpaceEnd)
-+            end,
-+            remove_auth_offers(<<Prefix/binary, Suffix/binary>>)
-+    end.
-+
-+ensure_advertise_login_disabled(ServerHello) ->
-+    case binary:match(ServerHello, <<"LOGINDISABLED">>) of
-+        nomatch -> <<ServerHello/binary, " LOGINDISABLED">>;
-+        _ -> ServerHello
-+    end.
-+
-Only in guam-0.8: CHANGELOG.md
-diff -ur guam-0.8.orig/contrib/guam.sysvinit guam-0.8/contrib/guam.sysvinit
---- guam-0.8.orig/contrib/guam.sysvinit	2016-06-08 14:18:58.000000000 +0200
-+++ guam-0.8/contrib/guam.sysvinit	2016-07-01 13:33:49.086734379 +0200
-@@ -11,6 +11,8 @@
- 
- name=`basename $0`
- 
-+export HOME=/opt/kolab_guam/
-+
- start_cmd="$name start"
- restart_cmd="$name restart"
- stop_cmd="$name stop"
-diff -ur guam-0.8.orig/docs/deployment.md guam-0.8/docs/deployment.md
---- guam-0.8.orig/docs/deployment.md	2016-06-08 14:18:58.000000000 +0200
-+++ guam-0.8/docs/deployment.md	2016-07-01 13:32:52.850100693 +0200
-@@ -84,14 +84,26 @@
-                 { rules, [ { filter_groupware, [] } ] },
-                 { tls_config, [ { certfile, "/etc/ssl/sample.pem" } ] }
-             ]
-+       },
-+       { default, [
-+                { net_iface, "eth0" },
-+                { port, 1993 },
-+                { imap_server, default },
-+                { implicit_tls, true },
-+                { rules, [ { filter_groupware, [] } ] },
-+                { tls_config, [ { certfile, "/etc/ssl/sample.pem" } ] }
-+            ]
-         }
-     }
- 
- The host entry is optional, and is used to bind the connection to a specific
--network interface. Leaving it empty will cause Guam to bind to the port accross
-+network interface by ip address. Alternatively, the net_iface may be defined and
-+guam will attempt to bind to an address on that network device. net_iface overrides
-+host, though host will be used as a fallback if net_iface does not produce a network
-+interface. Leaving host and net_iface empty will cause Guam to bind to the port accross
- all network interfaces available to it.
- 
--port defines the port it is listening on.
-+port defines the port the listener is active on.
- 
- imap_server refers to the entry in the imap_servers block. If not provided, the
- default entry in the imap_servers configuration is used.
-diff -ur guam-0.8.orig/rebar.config guam-0.8/rebar.config
---- guam-0.8.orig/rebar.config	2016-06-08 14:18:58.000000000 +0200
-+++ guam-0.8/rebar.config	2016-07-01 13:33:41.190645404 +0200
-@@ -3,9 +3,9 @@
- 
- { deps_dir, "deps" }.
- { deps, [
--    { lager, "(2.0|2.1|2.2).*", { git, "git://github.com/basho/lager.git", { tag, "2.2.0" } } },
-+    { lager, "3.*", { git, "git://github.com/basho/lager.git" } },
-     { lager_syslog, "2.*", { git, "git://github.com/basho/lager_syslog.git", { tag, "2.1.3" } } },
--    { eimap, ".*", { git, "https://git.kolab.org/diffusion/EI/eimap.git", { tag, "0.2.2" } } }
-+    { eimap, ".*", { git, "https://git.kolab.org/diffusion/EI/eimap.git", { tag, "0.2.4" } } }
-     %% pull in the proper version of meck before jobs 0.3 gets around to pulling in the wrong version
-    ]
- }.
-diff -ur guam-0.8.orig/rel/reltool.config guam-0.8/rel/reltool.config
---- guam-0.8.orig/rel/reltool.config	2016-06-08 14:18:58.000000000 +0200
-+++ guam-0.8/rel/reltool.config	2016-07-01 13:33:35.894585727 +0200
-@@ -4,7 +4,7 @@
-        {lib_dirs, ["../deps"]},
-        {erts, [{mod_cond, derived}, {app_file, strip}]},
-        {app_file, strip},
--       {rel, "kolab_guam", "0.9",
-+       {rel, "kolab_guam", "0.8",
-         [
-          kernel,
-          stdlib,

guam-0.8.1-relax-dependencies-set-correct-version-number.patch Added

@@ -0,0 +1,24 @@
+diff -ur guam-0.8.1.orig/rebar.config guam-0.8.1/rebar.config
+--- guam-0.8.1.orig/rebar.config	2016-07-04 12:40:07.000000000 +0200
++++ guam-0.8.1/rebar.config	2016-07-05 11:13:53.683350555 +0200
+@@ -3,7 +3,7 @@
+ 
+ { deps_dir, "deps" }.
+ { deps, [
+-    { lager, "(2.0|2.1|2.2).*", { git, "git://github.com/basho/lager.git", { tag, "2.2.0" } } },
++    { lager, "3.*", { git, "git://github.com/basho/lager.git" } },
+     { lager_syslog, "2.*", { git, "git://github.com/basho/lager_syslog.git", { tag, "2.1.3" } } },
+     { eimap, ".*", { git, "https://git.kolab.org/diffusion/EI/eimap.git", { tag, "0.2.5" } } }
+     %% pull in the proper version of meck before jobs 0.3 gets around to pulling in the wrong version
+diff -ur guam-0.8.1.orig/rel/reltool.config guam-0.8.1/rel/reltool.config
+--- guam-0.8.1.orig/rel/reltool.config	2016-07-04 12:40:07.000000000 +0200
++++ guam-0.8.1/rel/reltool.config	2016-07-05 11:14:03.958466677 +0200
+@@ -4,7 +4,7 @@
+        {lib_dirs, ["../deps"]},
+        {erts, [{mod_cond, derived}, {app_file, strip}]},
+        {app_file, strip},
+-       {rel, "kolab_guam", "0.9",
++       {rel, "kolab_guam", "0.8.1",
+         [
+          kernel,
+          stdlib,

debian.changelog Changed

debian.series Changed

guam-0.8.1.tar.gz/CHANGELOG.md Added

guam-0.8.tar.gz/apps/kolab_guam/src/kolab_guam.app.src -> guam-0.8.1.tar.gz/apps/kolab_guam/src/kolab_guam.app.src Changed

guam-0.8.tar.gz/apps/kolab_guam/src/kolab_guam_listener.erl -> guam-0.8.1.tar.gz/apps/kolab_guam/src/kolab_guam_listener.erl Changed

@@ -35,11 +35,12 @@
 %% gen_server API
 init([Name, Config]) ->
     Host = proplists:get_value(host, Config, none),
+    NetIface = proplists:get_value(net_iface, Config, none),
     Port = proplists:get_value(port, Config, ?DEFAULT_IMAP_PORT),
     ImplicitTLS = proplists:get_value(implicit_tls, Config, false),
     TLSConfig = proplists:get_value(tls_config, Config, []),
     Rules = proplists:get_value(rules, Config, []),
-    Options = listen_options(Host, ImplicitTLS, TLSConfig),
+    Options = listen_options(NetIface, Host, ImplicitTLS, TLSConfig),
     lager:info("Starting listener \"~p\" on port ~B (~p) with ~B rules", [Name, Port, Options, length(Rules)]),
     { ok, ListenSocket } = listen(ImplicitTLS, Port, Options),
     spawn_link(?MODULE, cleanup, [ListenSocket]),
@@ -55,17 +56,27 @@
 imap_config(none) -> kolab_guam_sup:default_imap_server_config();
 imap_config(Backend) -> kolab_guam_sup:imap_server_config(Backend).
 
-listen_options(none, ImplicitTLS, TLSConfig) -> default_listen_options(ImplicitTLS, TLSConfig);
-listen_options(Hostname, ImplicitTLS, TLSConfig) ->
+-spec listen_options(Iface :: string(), Hostname :: string(), ImplicitTLS :: boolean(), TLSConfig :: list()) -> list().
+listen_options(none, none, ImplicitTLS, TLSConfig) -> default_listen_options(ImplicitTLS, TLSConfig);
+listen_options(none, Hostname, ImplicitTLS, TLSConfig) ->
     case inet:gethostbyname(Hostname) of
         { ok, { hostent, _HostName, _Unused, inet, _Ver, [IP] } } ->
             [ { ip, IP } | default_listen_options(ImplicitTLS, TLSConfig) ];
         _ ->
-            listen_options(none, ImplicitTLS, TLSConfig)
+            listen_options(none, none, ImplicitTLS, TLSConfig)
+    end;
+listen_options(Iface, Hostname, ImplicitTLS, TLSConfig) ->
+    { ok, Ifaces } = inet:getifaddrs(),
+    case proplists:get_value(Iface, Ifaces) of
+        undefined -> listen_options(none, Hostname, ImplicitTLS, TLSConfig);
+        Info -> Addr = proplists:get_value(addr, Info, none),
+                %lager:info("YEAH! ~p", [Addr]),
+                listen_options(none, Addr, ImplicitTLS, TLSConfig)
     end.
 
-default_listen_options(true, TLSConfig) -> [ { reuseaddr, true }, {active, once } | TLSConfig ];
-default_listen_options(_ImplicitTLS, _Config) ->  [ { active, once }, { reuseaddr, true } ].
+default_listen_options(true, TLSConfig) -> default_listen_options() ++ TLSConfig;
+default_listen_options(_ImplicitTLS, _Config) -> default_listen_options().
+default_listen_options() -> [ { reuseaddr, true }, {active, once }, inet6 ].
 
 create_initial_listeners(PID) when is_pid(PID) ->
     lager:debug("Creating session pool for listener ~p", [PID]),

guam-0.8.tar.gz/apps/kolab_guam/src/kolab_guam_session.erl -> guam-0.8.1.tar.gz/apps/kolab_guam/src/kolab_guam_session.erl Changed

@@ -71,10 +71,12 @@
 handle_info({ ssl, Socket, Data }, State) ->
     %lager:debug("Data coming in from client over SSL, ~p", [Data]),
     process_client_data(Socket, Data, State);
-handle_info({ server_hello, ServerHello }, #state{ imap_session = ImapSession, tls_config = TLSConfig, socket = Socket, client_tls_active = TLSActive, deflator = Deflator } = State) ->
-    CorrectedHello = correct_hello(TLSActive, TLSConfig, ServerHello),
+handle_info({ server_hello, ServerHello }, #state{ imap_session = ImapSession, tls_config = TLSConfig, socket = Socket, client_implicit_tls = ImplicitTLS, client_tls_active = TLSActive, deflator = Deflator } = State) ->
+    CorrectedHello = correct_hello(TLSActive, ImplicitTLS, TLSConfig, ServerHello),
+    ServerIdent = proplists:get_value(server_id, ServerHello, <<>>),
+    FullGreeting = <<"* OK [CAPABILITIES ", CorrectedHello/binary, "] ", ServerIdent/binary, "\r\n">>,
     eimap:start_passthrough(ImapSession, self()),
-    relay_response(Socket, postprocess_server_data(Deflator, <<CorrectedHello/binary, "\r\n">>), TLSActive),
+    relay_response(Socket, postprocess_server_data(Deflator, FullGreeting), TLSActive),
     { noreply, State };
 handle_info({ { rule_data, Module, ResponseToken }, Data }, #state{ rules_active = ActiveRules } = State) ->
     %lager:debug("Got back data requested by rule ~p: ~p", [Module, Data]),
@@ -275,17 +277,20 @@
 set_socket_active(true, Socket) -> ssl:setopts(Socket, [{ active, once }]);
 set_socket_active(_, Socket) -> inet:setopts(Socket, [{ active, once }]).
 
--spec correct_hello(TLSActive :: true | false, TlSConfig :: [] | list(), ServerHello :: binary()) -> CorrectedHello :: binary().
-correct_hello(true, _TLSConfig, ServerHello) ->
+-spec correct_hello(TLSActive :: true | false, ImplicitTLS :: true | false, TlSConfig :: [] | list(), ServerHello :: binary()) -> CorrectedHello :: binary().
+correct_hello(true, true, _TLSConfig, ServerResponse) ->
     % the connection is already secured, so don't advertise starttls to the client
-    ensure_hello_does_not_have_starttls(ServerHello);
-correct_hello(_TLSActive, [], ServerHello) ->
+    ensure_hello_does_not_have_starttls(ServerResponse);
+correct_hello(true, _ImplicitTLS, _TLSConfig, ServerResponse) ->
+    % the connection is already secured, so don't advertise starttls to the client
+    ensure_hello_does_not_have_starttls(ServerResponse);
+correct_hello(_TLSActive, _ImplicitTLS, [], ServerResponse) ->
     % guam does not have a TLS config and so can not provide TLS to the client
-    ensure_hello_does_not_have_starttls(ServerHello);
-correct_hello(_TLSAcive, _TLSConfig, ServerHello) ->
+    ensure_hello_does_not_have_starttls(ServerResponse);
+correct_hello(_TLSActive, _ImplicitTLS, _TLSConfig, ServerResponse) ->
     % guam has a TLS config, and it is not currently active, so make sure to include
     % STARTTLS in our response regardless of what the backend says
-    ensure_hello_has_starttls(ServerHello).
+    ensure_hello_has_starttls(ServerResponse).
 
 ensure_hello_has_starttls(ServerResponse) ->
     ServerHello = proplists:get_value(capabilities, ServerResponse, <<>>),
@@ -296,14 +301,26 @@
 
 add_starttls_to_capabilities(ServerHello) ->
     case binary:match(ServerHello, <<"CAPABILITY ">>) of
-        nomatch -> ServerHello;
+        nomatch -> add_starttls_after_imap4_atom(ServerHello);
+        { Start, End } ->
+            Prefix = binary:part(ServerHello, 0, Start + End),
+            Suffix = binary:part(ServerHello, Start + End, size(ServerHello) - Start - End),
+            CorrectHello = <<Prefix/binary, "STARTTLS ", Suffix/binary>>,
+            remove_auth_offers(CorrectHello)
+    end.
+
+add_starttls_after_imap4_atom(ServerHello) ->
+    case binary:match(ServerHello, <<"IMAP4rev1 ">>) of
+        nomatch -> <<"STARTTLS ", ServerHello/binary>>;
         { Start, End } ->
             Prefix = binary:part(ServerHello, 0, Start + End),
             Suffix = binary:part(ServerHello, Start + End, size(ServerHello) - Start - End),
-            <<Prefix/binary, "STARTTLS ", Suffix/binary>>
+            CorrectHello = <<Prefix/binary, "STARTTLS ", Suffix/binary>>,
+            remove_auth_offers(CorrectHello)
     end.
 
-ensure_hello_does_not_have_starttls(ServerHello) ->
+ensure_hello_does_not_have_starttls(ServerResponse) ->
+    ServerHello = proplists:get_value(capabilities, ServerResponse, <<>>),
     case binary:match(ServerHello, <<"STARTTLS">>) of
         nomatch -> ServerHello;
         { Start, End } ->
@@ -312,3 +329,25 @@
             <<Prefix/binary, Suffix/binary>>
     end.
 
+remove_auth_offers(ServerHello) ->
+    case binary:match(ServerHello, <<"AUTH=">>) of
+        nomatch -> ensure_advertise_login_disabled(ServerHello);
+        { Start, _End } ->
+            Prefix = binary:part(ServerHello, 0, Start),
+            Suffix =
+            case binary:match(ServerHello, <<" ">>, [{ scope, { Start, size(ServerHello) - Start } }]) of
+                nomatch ->
+                    %% end of the line, so no suffix
+                    <<>>;
+                { SpaceStart, SpaceEnd } ->
+                    binary:part(ServerHello, SpaceStart + SpaceEnd, size(ServerHello) - SpaceStart - SpaceEnd)
+            end,
+            remove_auth_offers(<<Prefix/binary, Suffix/binary>>)
+    end.
+
+ensure_advertise_login_disabled(ServerHello) ->
+    case binary:match(ServerHello, <<"LOGINDISABLED">>) of
+        nomatch -> <<ServerHello/binary, " LOGINDISABLED">>;
+        _ -> ServerHello
+    end.
+

guam-0.8.tar.gz/apps/kolab_guam/src/rules/kolab_guam_rule_filter_groupware.erl -> guam-0.8.1.tar.gz/apps/kolab_guam/src/rules/kolab_guam_rule_filter_groupware.erl Changed

@@ -27,14 +27,12 @@
 applies(_ConnectionDetails, Buffer, State) ->
     { _Tag, Command, Data } = eimap_utils:split_command_into_components(Buffer),
     %lager:debug("********** Checking ...~n    Command: ~s ~s", [Command, Data]),
-    { apply_if_id_matches(Command, Data, State#state.trigger_commands), State }.
+    { apply_if_id_matches(Command, Data, State), State }.
 
 apply_to_client_message(ImapSession, Buffer, State) ->
     { Tag, Command, Data } = eimap_utils:split_command_into_components(Buffer),
     { Active, StateTag }=
-    case lists:any(fun(T) -> (Command =:= T) andalso
-                             ((binary:match(Data, <<"*">>) =/= nomatch) orelse (binary:match(Data, <<"%">>) =/= nomatch)) end,
-                   State#state.trigger_commands) of
+    case is_triggering_command(Command, Data, State) of
         true -> fetch_metadata(ImapSession, State), { true, Tag };
         _ -> { false, <<>> }
     end,
@@ -55,16 +53,22 @@
     State#state{ blacklist = Blacklist }.
 
 %%PRIVATE
+is_triggering_command(Command, Data, #state{ trigger_commands = TriggerCommands }) ->
+    %% if the command is in the list of trigger commands and the ending is not "" (which means "send me
+    %% the root and separator" according to RFC 3501), then it is treated as a triggering event
+    lists:any(fun(T) -> (Command =:= T) andalso (binary:longest_common_suffix([Data, <<"\"\"">>]) =/= 2) end,
+              TriggerCommands).
+
 
 fetch_metadata(none, #state{ blacklist = undefined }) -> ok;
 fetch_metadata(ImapSession, #state{ blacklist = undefined }) ->
     eimap:get_folder_metadata(ImapSession, self(), { rule_data, ?MODULE, blacklist }, "*", ["/shared/vendor/kolab/folder-type"]);
 fetch_metadata(_ImapSession, _State) -> ok.
 
-apply_if_id_matches(<<"ID">>, Data, _TriggerCommands) ->
+apply_if_id_matches(<<"ID">>, Data, _State) ->
     apply_if_found_kolab(binary:match(Data, <<"/Kolab">>));
-apply_if_id_matches(Command, _Data, TriggerCommands) ->
-    case lists:any(fun(T) -> Command =:= T end, TriggerCommands) of
+apply_if_id_matches(Command, Data, State) ->
+    case is_triggering_command(Command, Data, State) of
         true -> true;
         _ -> notyet
     end.

guam-0.8.tar.gz/docs/deployment.md -> guam-0.8.1.tar.gz/docs/deployment.md Changed

@@ -84,14 +84,26 @@
                 { rules, [ { filter_groupware, [] } ] },
                 { tls_config, [ { certfile, "/etc/ssl/sample.pem" } ] }
             ]
+       },
+       { default, [
+                { net_iface, "eth0" },
+                { port, 1993 },
+                { imap_server, default },
+                { implicit_tls, true },
+                { rules, [ { filter_groupware, [] } ] },
+                { tls_config, [ { certfile, "/etc/ssl/sample.pem" } ] }
+            ]
         }
     }
 
 The host entry is optional, and is used to bind the connection to a specific
-network interface. Leaving it empty will cause Guam to bind to the port accross
+network interface by ip address. Alternatively, the net_iface may be defined and
+guam will attempt to bind to an address on that network device. net_iface overrides
+host, though host will be used as a fallback if net_iface does not produce a network
+interface. Leaving host and net_iface empty will cause Guam to bind to the port accross
 all network interfaces available to it.
 
-port defines the port it is listening on.
+port defines the port the listener is active on.
 
 imap_server refers to the entry in the imap_servers block. If not provided, the
 default entry in the imap_servers configuration is used.

guam-0.8.tar.gz/rebar.config -> guam-0.8.1.tar.gz/rebar.config Changed

guam.dsc Changed