Kolab Groupware OBS

Changes of Revision 14

pykolab.spec Changed

@@ -7,6 +7,7 @@
 %if 0%{?suse_version} || 0%{?fedora} > 17 || 0%{?rhel} > 6
 %global with_systemd 1
 %{!?_unitdir:   %global _unitdir /usr/lib/systemd/system/}
+%{!?_rundir:    %global _rundir  %{_localstatedir}/run}
 %else
 %global with_systemd 0
 %endif
@@ -28,7 +29,7 @@
 
 Summary:            Kolab Groupware Solution
 Name:               pykolab
-Version:            0.8.3
+Version:            0.8.4
 Release:            1%{?dist}
 License:            GPLv3+
 Group:              Applications/System
@@ -83,7 +84,14 @@
 
 BuildRequires:      python-sievelib
 BuildRequires:      python-sqlalchemy
+
+%if 0%{?fedora} >= 23
+# Fedora 23 has python2-twisted and python-twisted
+BuildRequires:      python-twisted
+%else
 BuildRequires:      python-twisted-core
+%endif
+BuildRequires:      python-tzlocal
 
 %if 0%{?fedora} >= 21
 # Fedora 21 has qca2 and qca, qca2 has been renamed to qca, required by kdelibs
@@ -144,6 +152,7 @@
 Requires:           python-icalendar
 Requires:           python-kolab
 Requires:           python-kolabformat >= 0.5
+Requires:           python-tzlocal
 
 %description xml
 Kolab Format XML bindings wrapper for %{name}
@@ -223,6 +232,7 @@
 %endif
 Requires:           python-gnupg
 Requires:           python-icalendar >= 3.0
+Requires:           python-tzlocal
 Requires:           %{name}-xml = %{version}-%{release}
 
 %description -n wallace
@@ -355,6 +365,7 @@
 if  "$1" == "1"  ; then
 %if 0%{?with_systemd}
     /bin/systemctl daemon-reload >/dev/null 2>&1 || :
+    systemd-tmpfiles --create
 %else
     /sbin/chkconfig --add kolabd
 %endif
@@ -379,6 +390,7 @@
 if  "$1" == "1"  ; then
 %if 0%{?with_systemd}
     /bin/systemctl daemon-reload >/dev/null 2>&1 || :
+    systemd-tmpfiles --create
 %else
     chkconfig --add wallace
 %endif
@@ -498,8 +510,8 @@
 %{_sbindir}/kolab-saslauthd
 %{python_sitelib}/saslauthd/
 %if 0%{?suse_version} > 0 || 0%{?fedora} > 17 || 0%{?rhel} > 6
-%ghost %dir %{_localstatedir}/run/kolab-saslauthd
-%ghost %dir %{_localstatedir}/run/saslauthd
+%ghost %dir %{_rundir}/kolab-saslauthd
+%ghost %dir %{_rundir}/saslauthd
 %else
 %dir %{_localstatedir}/run/kolab-saslauthd
 %dir %{_localstatedir}/run/saslauthd
@@ -528,7 +540,7 @@
 %{_sbindir}/kolabd
 %{python_sitelib}/kolabd/
 %if 0%{?suse_version} > 0 || 0%{?fedora} > 17 || 0%{?rhel} > 6
-%ghost %dir %{_localstatedir}/run/kolabd
+%ghost %dir %{_rundir}/kolabd
 %else
 %attr(0770,kolab,kolab) %dir %{_localstatedir}/run/kolabd
 %endif
@@ -549,7 +561,11 @@
 %dir %{_prefix}/lib/tmpfiles.d/
 %endif
 %{_prefix}/lib/tmpfiles.d/wallace.conf
+%if 0%{?suse_version} > 0 || 0%{?fedora} > 17 || 0%{?rhel} > 6
+%ghost %dir %{_rundir}/wallaced
+%else
 %attr(0700,%{kolab_user},%{kolab_group}) %dir /run/wallaced
+%endif
 %else
 %{_initrddir}/wallace
 %endif
@@ -564,6 +580,16 @@
 %attr(0700,%{kolab_user},%{kolab_group}) %dir %{_var}/spool/pykolab/wallace
 
 %changelog
+* Fri Sep 30 2016 Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com> - 0.8.4-1
+- Release of version 0.8.4
+
+* Tue Sep 20 2016 Timotheus Pokorra <tp@tbits.net> - 0.8.3-3
+- Fix for Fedora 23 and higher, python-twisted buildrequires
+- Create /run directories for kolabd and wallaced services 
+
+* Wed Jul 27 2016 Dominique Leuenberger (openSUSE) <dimstar@opensuse.org> - 0.8.3-2
+- Fix build on openSUSE systems: use %_rundir instead of /var/run
+
 * Fri Jul 22 2016 Jeroen van Meeuwen (Kolab Systems) <vanmeeuwen@kolabsys.com> - 0.8.3-1
 - Release of version 0.8.3

debian.changelog Changed

debian.control Changed

pykolab-0.8.3.tar.gz/configure.ac -> pykolab-0.8.4.tar.gz/configure.ac Changed

pykolab-0.8.3.tar.gz/po/POTFILES.skip -> pykolab-0.8.4.tar.gz/po/POTFILES.skip Changed

pykolab-0.8.3.tar.gz/po/de.po -> pykolab-0.8.4.tar.gz/po/de.po Changed

@@ -5,6 +5,7 @@
 # Translators:
 # Christoph Wickert <christoph.wickert@gmail.com>, 2015
 # Christoph Wickert <christoph.wickert@gmail.com>, 2011
+# Colja Vendel <vendel.colja@googlemail.com>, 2016
 # Dirk Marschner <info@marschner.cx>, 2015
 # Dirk Marschner <info@marschner.cx>, 2015
 # Ettore Atalan <atalanttore@googlemail.com>, 2014-2016
@@ -22,8 +23,8 @@
 "Project-Id-Version: Kolab Groupware Solution\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2016-07-22 15:31+0200\n"
-"PO-Revision-Date: 2016-07-22 13:31+0000\n"
-"Last-Translator: Jeroen van Meeuwen <vanmeeuwen@kolabsys.com>\n"
+"PO-Revision-Date: 2016-09-27 07:33+0000\n"
+"Last-Translator: Mads <mads@batmads.com>\n"
 "Language-Team: German (http://www.transifex.com/kolab/kolab/language/de/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -364,7 +365,7 @@
 #: ../saslauthd/__init__.py:170 ../saslauthd/__init__.py:179
 #: ../wallace/__init__.py:469 ../wallace/__init__.py:478
 msgid "Traceback occurred, please report a bug at https://issues.kolab.org"
-msgstr ""
+msgstr "Traceback Softwarefehler aufgetreten, bitte auf https://issues.kolab.org einen Fehlerreport erstellen."
 
 #: ../kolabd/__init__.py:226 ../saslauthd/__init__.py:175
 #: ../wallace/__init__.py:474
@@ -514,7 +515,7 @@
 #: ../pykolab/auth/ldap/__init__.py:1467 ../pykolab/auth/ldap/__init__.py:3066
 #, python-format
 msgid "LDAP server unavailable: %r"
-msgstr ""
+msgstr "LDAP-Server nicht erreichbar: %r"
 
 #: ../pykolab/auth/ldap/__init__.py:230 ../pykolab/auth/ldap/__init__.py:237
 #: ../pykolab/auth/ldap/__init__.py:1316 ../pykolab/auth/ldap/__init__.py:1442
@@ -527,41 +528,41 @@
 #: ../pykolab/auth/ldap/__init__.py:236
 #, python-format
 msgid "Exception occurred: %r"
-msgstr ""
+msgstr "Ausnahme aufgetreten: %r"
 
 #: ../pykolab/auth/ldap/__init__.py:243
 #, python-format
 msgid "Length of entries found: %r"
-msgstr ""
+msgstr "Länge der gefundenen Einträge: %r"
 
 #: ../pykolab/auth/ldap/__init__.py:255
 #, python-format
 msgid "Authentication for %r failed (multiple entries)"
-msgstr ""
+msgstr "Authentifizierung für %r fehlgeschlagen (mehrfache Einträge)"
 
 #: ../pykolab/auth/ldap/__init__.py:269
 #, python-format
 msgid "Authentication for %r failed (no entry)"
-msgstr ""
+msgstr "Authentifizierung für %r fehlgeschlagen (kein Eintrag)"
 
 #: ../pykolab/auth/ldap/__init__.py:282
 #, python-format
 msgid "Authentication for %r failed (LDAP error?)"
-msgstr ""
+msgstr "Authentifizierung für %r fehlgeschlagen (LDAP-Fehler?)"
 
 #: ../pykolab/auth/ldap/__init__.py:300 ../pykolab/auth/ldap/__init__.py:354
 #, python-format
 msgid "Authentication for %r succeeded"
-msgstr ""
+msgstr "Authentifizierung für %r erfolgreich"
 
 #: ../pykolab/auth/ldap/__init__.py:311
 #, python-format
 msgid "Authentication for %r failed (error)"
-msgstr ""
+msgstr "Authentifizierung für %r fehlgeschlagen (Fehler)"
 
 #: ../pykolab/auth/ldap/__init__.py:328
 msgid "Authentication failed, LDAP server unavailable"
-msgstr ""
+msgstr "Authentifizierung fehlgeschlagen, LDAP-Server nicht erreichbar"
 
 #: ../pykolab/auth/ldap/__init__.py:336 ../pykolab/auth/ldap/__init__.py:391
 #, python-format
@@ -571,7 +572,7 @@
 #: ../pykolab/auth/ldap/__init__.py:357
 #, python-format
 msgid "Authentication for %r failed (password)"
-msgstr ""
+msgstr "Authentifizierung für %r fehlgeschlagen (Passwort)"
 
 #: ../pykolab/auth/ldap/__init__.py:369
 #, python-format
@@ -697,7 +698,7 @@
 #: ../pykolab/auth/ldap/__init__.py:1071
 #, python-format
 msgid "1 result for address %s found, verifying..."
-msgstr ""
+msgstr "1 Ergebnis für Adresse %s gefunden, wird überprüft..."
 
 #: ../pykolab/auth/ldap/__init__.py:1082
 #, python-format
@@ -804,7 +805,7 @@
 #: ../pykolab/auth/ldap/__init__.py:1686
 #, python-format
 msgid "Entry %s attribute value: %r"
-msgstr ""
+msgstr "Eintrag %s Attributwert: %r"
 
 #: ../pykolab/auth/ldap/__init__.py:1694
 #, python-format
@@ -814,7 +815,7 @@
 #: ../pykolab/auth/ldap/__init__.py:1755
 #, python-format
 msgid "An error occured: %r"
-msgstr ""
+msgstr "Ein Fehler ist aufgetreten: %r"
 
 #: ../pykolab/auth/ldap/__init__.py:1993 ../pykolab/auth/ldap/__init__.py:2187
 #, python-format
@@ -906,7 +907,7 @@
 
 #: ../pykolab/auth/ldap/__init__.py:3068
 msgid "-- reconnecting in 10 seconds."
-msgstr ""
+msgstr "-- erneuter Verbindungsaufbau in 10 Sekunden."
 
 #: ../pykolab/auth/ldap/__init__.py:3076
 #, python-format
@@ -1052,7 +1053,7 @@
 
 #: ../pykolab/cli/cmd_check_quota.py:57
 msgid "Compare existing IMAP quota with LDAP quota."
-msgstr ""
+msgstr "Vorhandenes IMAP-Kontingent mit LDAP-Kontingent vergleichen."
 
 #: ../pykolab/cli/cmd_check_quota.py:84 ../pykolab/cli/cmd_user_info.py:51
 #, python-format
@@ -1062,7 +1063,7 @@
 #: ../pykolab/cli/cmd_check_quota.py:98
 #, python-format
 msgid "No quota for user %s"
-msgstr ""
+msgstr "Kein Kontingent für Benutzer %s"
 
 #: ../pykolab/cli/cmd_check_quota.py:105
 #, python-format
@@ -1153,7 +1154,7 @@
 
 #: ../pykolab/cli/cmd_export_mailbox.py:38
 msgid "All folders this user has access to"
-msgstr ""
+msgstr "Alle Ordner auf die der Benutzer zugriff hat"
 
 #: ../pykolab/cli/cmd_export_mailbox.py:108
 #, python-format
@@ -1319,7 +1320,7 @@
 #: ../pykolab/cli/cmd_remove_user_subscription.py:86
 #, python-format
 msgid "Successfully unsubscribed user %s from the following folders:"
-msgstr ""
+msgstr "Für Benutzer %s wurde das Abonnement folgender Ordner erfolgreich beendet:"
 
 #: ../pykolab/cli/cmd_remove_user_subscription.py:92
 #, python-format
@@ -1866,12 +1867,12 @@
 #: ../pykolab/imap/cyrus.py:294 ../pykolab/imap/dovecot.py:311
 #, python-format
 msgid "Setting quota for folder %s to %s"
-msgstr "Setze Quota für Verzeichnis %s auf %s"
+msgstr "Kontingent für Ordner %s auf %s wird festgelegt"
 
 #: ../pykolab/imap/cyrus.py:305 ../pykolab/imap/dovecot.py:315
 #, python-format
 msgid "Could not set quota for mailfolder %s"
-msgstr "Konnte Quota für Verzeichnis %s nicht setzen"
+msgstr "Kontingent für Mailordner %s konnte nicht festgelegt werden"
 
 #: ../pykolab/imap/cyrus.py:319 ../pykolab/imap/dovecot.py:320
 #, python-format
@@ -2081,7 +2082,7 @@
 #: ../pykolab/imap/__init__.py:750
 #, python-format
 msgid "Could not set quota on %s"
-msgstr ""
+msgstr "Kontingent auf %s konnte nicht festgelegt werden"
 
 #: ../pykolab/imap/__init__.py:757
 #, python-format
@@ -2148,7 +2149,7 @@
 #: ../pykolab/imap/__init__.py:981
 #, python-format
 msgid "Cannot get current IMAP quota for folder %s"
-msgstr "Kann aktuelles IMAP Kontingent für den Ordner %s nicht bekommen"
+msgstr "Kann aktuelles IMAP-Kontingent für den Ordner %s nicht holen"
 
 #: ../pykolab/imap/__init__.py:994
 #, python-format
@@ -2163,7 +2164,7 @@
 #: ../pykolab/imap/__init__.py:1005
 #, python-format
 msgid "Correcting quota for %s to %s (currently %s)"
-msgstr ""
+msgstr "Kontingent für %s wird zu %s korrigiert (aktuell %s)"
 
 #: ../pykolab/imap/__init__.py:1082
 #, python-format
@@ -2271,7 +2272,7 @@
 #: ../pykolab/plugins/dynamicquota/__init__.py:70
 #, python-format
 msgid "Quota '%s' not an integer!"
-msgstr ""
+msgstr "Kontingent '%s' ist keine Ganzzahl!"
 
 #: ../pykolab/plugins/__init__.py:70
 #, python-format
@@ -3094,7 +3095,7 @@
 #: ../tests/functional/test_wallace/test_007_invitationpolicy.py:914
 #: ../tests/functional/test_wallace/test_007_invitationpolicy.py:926
 msgid "Pending"
-msgstr ""
+msgstr "Ausstehend"
 
 #: ../pykolab/xml/attendee.py:133 ../pykolab/xml/attendee.py:155
 msgid "Not a valid attendee"
@@ -3938,7 +3939,7 @@
 #: ../wallace/module_invitationpolicy.py:1284
 #, python-format
 msgid "The assignment for '%(summary)s' has been cancelled by %(organizer)s."
-msgstr ""
+msgstr "Die Zuweisung für '%(summary)s' wurde von %(organizer)s zurückgezogen."
 
 #: ../wallace/module_invitationpolicy.py:1289
 msgid "The copy in your tasklist has been removed accordingly."
@@ -3946,13 +3947,13 @@
 
 #: ../wallace/module_invitationpolicy.py:1291
 msgid "The copy in your tasklist has been marked as cancelled accordingly."
-msgstr ""
+msgstr "Daher wurde die Aufgabe aus Iher Aufgabenliste storniert."
 
 #: ../wallace/module_invitationpolicy.py:1293
 #, python-format
 msgid ""
 "The event '%(summary)s' at %(start)s has been cancelled by %(organizer)s."
-msgstr ""
+msgstr "Der Termin '%(summary)s' am/um %(start)s wurde von %(organizer)s abgesagt."
 
 #: ../wallace/module_invitationpolicy.py:1299
 msgid "The copy in your calendar has been removed accordingly."
@@ -3960,7 +3961,7 @@
 
 #: ../wallace/module_invitationpolicy.py:1301
 msgid "The copy in your calendar has been marked as cancelled accordingly."
-msgstr ""
+msgstr "Der Eintrag in Ihrem Kalender wurde als abgesagt gekennzeichnet."
 
 #: ../wallace/module_invitationpolicy.py:1307
 msgid "NOTE: This cancellation only refers to this single occurrence!"
@@ -4429,7 +4430,7 @@
 #: ../wallace/modules.py:193
 #, python-format
 msgid "The time when the message was sent: %r"
-msgstr "Zeitpunkt des Versandts: %r"
+msgstr "Zeitpunkt des Versands: %r"
 
 #: ../wallace/modules.py:194
 #, python-format

pykolab-0.8.3.tar.gz/po/de_DE.po -> pykolab-0.8.4.tar.gz/po/de_DE.po Changed

@@ -4,6 +4,7 @@
 # 
 # Translators:
 # Christoph Wickert <christoph.wickert@gmail.com>, 2012
+# Colja Vendel <vendel.colja@googlemail.com>, 2016
 # Torsten Grote <grote@kolabsys.com>, 2012
 # Thomas Bruederli <roundcube@gmail.com>, 2014
 msgid ""
@@ -11,8 +12,8 @@
 "Project-Id-Version: Kolab Groupware Solution\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2016-07-22 15:31+0200\n"
-"PO-Revision-Date: 2016-07-22 13:31+0000\n"
-"Last-Translator: Jeroen van Meeuwen <vanmeeuwen@kolabsys.com>\n"
+"PO-Revision-Date: 2016-09-16 12:28+0000\n"
+"Last-Translator: Colja Vendel <vendel.colja@googlemail.com>\n"
 "Language-Team: German (Germany) (http://www.transifex.com/kolab/kolab/language/de_DE/)\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -3083,7 +3084,7 @@
 #: ../tests/functional/test_wallace/test_007_invitationpolicy.py:914
 #: ../tests/functional/test_wallace/test_007_invitationpolicy.py:926
 msgid "Pending"
-msgstr ""
+msgstr "Ausstehend"
 
 #: ../pykolab/xml/attendee.py:133 ../pykolab/xml/attendee.py:155
 msgid "Not a valid attendee"
@@ -3927,7 +3928,7 @@
 #: ../wallace/module_invitationpolicy.py:1284
 #, python-format
 msgid "The assignment for '%(summary)s' has been cancelled by %(organizer)s."
-msgstr ""
+msgstr "Die Zuweisung für '%(summary)s' wurde von %(organizer)s zurückgezogen."
 
 #: ../wallace/module_invitationpolicy.py:1289
 msgid "The copy in your tasklist has been removed accordingly."
@@ -3941,7 +3942,7 @@
 #, python-format
 msgid ""
 "The event '%(summary)s' at %(start)s has been cancelled by %(organizer)s."
-msgstr ""
+msgstr "Der Termin '%(summary)s' am/um %(start)s wurde von %(organizer)s abgesagt."
 
 #: ../wallace/module_invitationpolicy.py:1299
 msgid "The copy in your calendar has been removed accordingly."

pykolab-0.8.3.tar.gz/po/fr.po -> pykolab-0.8.4.tar.gz/po/fr.po Changed

@@ -13,7 +13,7 @@
 "Project-Id-Version: Kolab Groupware Solution\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2016-07-22 15:31+0200\n"
-"PO-Revision-Date: 2016-07-22 13:31+0000\n"
+"PO-Revision-Date: 2016-07-22 13:51+0000\n"
 "Last-Translator: Jeroen van Meeuwen <vanmeeuwen@kolabsys.com>\n"
 "Language-Team: French (http://www.transifex.com/kolab/kolab/language/fr/)\n"
 "MIME-Version: 1.0\n"
@@ -621,7 +621,7 @@
 #: ../pykolab/auth/ldap/__init__.py:869
 #, python-format
 msgid "Not applying recipient policy for %s (disabled through configuration)"
-msgstr ""
+msgstr "La politique de récepteur n'applique pas pour %s (désactivé à travers la configuration)"
 
 #: ../pykolab/auth/ldap/__init__.py:879
 #, python-format
@@ -674,7 +674,7 @@
 #: ../pykolab/auth/ldap/__init__.py:994
 #, python-format
 msgid "Too bad, primary email address %s already in use for %s (we are %s)"
-msgstr ""
+msgstr "Désolé, l'adresse e-mail principale %s déjà utilisé pour %s (nous sommes %s)"
 
 #: ../pykolab/auth/ldap/__init__.py:1005 ../pykolab/auth/ldap/__init__.py:1094
 msgid "Address assigned to us"
@@ -688,12 +688,12 @@
 #: ../pykolab/auth/ldap/__init__.py:1071
 #, python-format
 msgid "1 result for address %s found, verifying..."
-msgstr ""
+msgstr "1 résultat trouvé pour l'adresse %s, en vérification..."
 
 #: ../pykolab/auth/ldap/__init__.py:1082
 #, python-format
 msgid "Too bad, secondary email address %s already in use for %s (we are %s)"
-msgstr ""
+msgstr "Désolé, l'adresse e-mail secondaire %s déjà utilisé pour %s (nous sommes %s)"
 
 #: ../pykolab/auth/ldap/__init__.py:1109
 #, python-format
@@ -711,7 +711,7 @@
 msgid ""
 "Avoiding the duplication of the primary mail address %r in the list of "
 "secondary mail addresses"
-msgstr ""
+msgstr "Évitant la duplication d'adresse mail principal %r dans la liste d'adresses mail secondaire"
 
 #: ../pykolab/auth/ldap/__init__.py:1142
 #, python-format
@@ -721,7 +721,7 @@
 #: ../pykolab/auth/ldap/__init__.py:1150
 #, python-format
 msgid "Entry did not have any secondary mail addresses in %r"
-msgstr ""
+msgstr "Entré n'as aucune adresses mail secondaire dans %r"
 
 #: ../pykolab/auth/ldap/__init__.py:1167 ../pykolab/auth/ldap/__init__.py:1173
 #, python-format
@@ -950,7 +950,7 @@
 #: ../pykolab/cli/cmd_add_alias.py:97
 msgid ""
 "Environment is not configured for users to hold secondary mail attributes"
-msgstr ""
+msgstr "Environnement n'est pas configuré pour supporter des attribues de mail secondaire pour utilisateurs"
 
 #: ../pykolab/cli/cmd_add_alias.py:105
 #, python-format
@@ -989,7 +989,7 @@
 msgid ""
 "Could not find credentials with sufficient permissionsto add a domain name "
 "space."
-msgstr ""
+msgstr "Impossible de trouver les références avec les autorisations suffisantes pour ajouter un espace de nom de domaine. "
 
 #: ../pykolab/cli/cmd_add_domain.py:67 ../pykolab/cli/cmd_delete_domain.py:67
 #: ../pykolab/cli/cmd_find_domain.py:56
@@ -1599,7 +1599,7 @@
 #: ../pykolab/conf/entitlement.py:262
 #, python-format
 msgid "Invalid entitlement verification certificate at %s"
-msgstr ""
+msgstr "Licence de vérification invalide au %s"
 
 #: ../pykolab/conf/entitlement.py:120 ../pykolab/conf/entitlement.py:123
 msgid "Invalid entitlement certificate"
@@ -2976,7 +2976,7 @@
 
 #: ../pykolab/utils.py:74
 msgid "Incorrect confirmation. Please try again."
-msgstr ""
+msgstr "Confirmation incorrecte. Veuillez réessayer."
 
 #: ../pykolab/utils.py:79 ../pykolab/utils.py:84
 #, python-format
@@ -3085,7 +3085,7 @@
 #: ../tests/functional/test_wallace/test_007_invitationpolicy.py:914
 #: ../tests/functional/test_wallace/test_007_invitationpolicy.py:926
 msgid "Pending"
-msgstr ""
+msgstr "En attente"
 
 #: ../pykolab/xml/attendee.py:133 ../pykolab/xml/attendee.py:155
 msgid "Not a valid attendee"
@@ -4298,7 +4298,7 @@
 #: ../wallace/module_resources.py:1092
 #, python-format
 msgid "The following resources are being referred to in the iTip: %r"
-msgstr ""
+msgstr "Les ressources suivantes sont mentionnées dans le iTip: %"
 
 #: ../wallace/module_resources.py:1219
 #, python-format

pykolab-0.8.3.tar.gz/pykolab/setup/setup_mta.py -> pykolab-0.8.4.tar.gz/pykolab/setup/setup_mta.py Changed

@@ -261,9 +261,9 @@
             "smtp_tls_security_level": "may",
             "smtpd_sasl_auth_enable": "yes",
             "smtpd_sender_login_maps": "$local_recipient_maps",
-            "smtpd_sender_restrictions": "permit_mynetworks, reject_sender_login_mismatch",
+            "smtpd_data_restrictions": "permit_mynetworks, check_policy_service unix:private/recipient_policy_incoming",
             "smtpd_recipient_restrictions": "permit_mynetworks, reject_unauth_pipelining, reject_rbl_client zen.spamhaus.org, reject_non_fqdn_recipient, reject_invalid_helo_hostname, reject_unknown_recipient_domain, reject_unauth_destination, check_policy_service unix:private/recipient_policy_incoming, permit",
-            "smtpd_sender_restrictions": "permit_mynetworks, check_policy_service unix:private/sender_policy_incoming",
+            "smtpd_sender_restrictions": "permit_mynetworks, reject_sender_login_mismatch, check_policy_service unix:private/sender_policy_incoming",
             "submission_recipient_restrictions": "check_policy_service unix:private/submission_policy, permit_sasl_authenticated, reject",
             "submission_sender_restrictions": "reject_non_fqdn_sender, check_policy_service unix:private/submission_policy, permit_sasl_authenticated, reject",
             "submission_data_restrictions": "check_policy_service unix:private/submission_policy",
@@ -456,6 +456,28 @@
         with open('/etc/systemd/system/clamd@.service', 'wb') as f:
             unitfile.write(f)
 
+    log.info(_("Configuring and refreshing Anti-Virus..."))
+
+    if os.path.isfile('/etc/kolab/templates/freshclam.conf.tpl'):
+        shutil.copy(
+                '/etc/kolab/templates/freshclam.conf.tpl',
+                '/etc/freshclam.conf'
+            )
+    elif os.path.isfile('/usr/share/kolab/templates/freshclam.conf.tpl'):
+        shutil.copy(
+                '/usr/share/kolab/templates/freshclam.conf.tpl',
+                '/etc/freshclam.conf'
+            )
+    else:
+        log.error(_("Could not find a ClamAV update configuration file"))
+
+    if os.path.isfile('/etc/freshclam.conf'):
+        subprocess.call(
+                '/usr/bin/freshclam',
+                '--quiet',
+                '--datadir="/var/lib/clamav"'
+            )
+
     amavisservice = 'amavisd.service'
     clamavservice = 'clamd@amavisd.service'
     if os.path.isfile('/usr/lib/systemd/system/amavis.service'):

pykolab-0.8.3.tar.gz/pykolab/setup/setup_roundcube.py -> pykolab-0.8.4.tar.gz/pykolab/setup/setup_roundcube.py Changed

@@ -265,6 +265,8 @@
 
     root_uid = 0
 
+    webserver_gid = None
+
     for webserver_group in  'apache', 'www-data', 'www' :
         try:
             (a,b,webserver_gid,c) = grp.getgrnam(webserver_group)
@@ -272,10 +274,18 @@
         except Exception, errmsg:
             pass
 
-    if not rccpath == None:
-        for root, directories, filenames in os.walk(rccpath):
-            for filename in filenames:
-                os.chown(os.path.join(root, filename), root_uid, webserver_gid)
+    if webserver_gid is not None:
+        if rccpath is not None:
+            for root, directories, filenames in os.walk(rccpath):
+                for filename in filenames:
+                    try:
+                        os.chown(
+                                os.path.join(root, filename),
+                                root_uid,
+                                webserver_gid
+                            )
+                    except Exception, errmsg:
+                        pass
 
     httpservice = 'httpd.service'
     if os.path.isfile('/usr/lib/systemd/system/apache2.service'):

pykolab-0.8.4.tar.gz/share/templates/freshclam.conf.tpl Added

@@ -0,0 +1,230 @@
+##
+## Example config file for freshclam
+## Please read the freshclam.conf(5) manual before editing this file.
+##
+
+# Path to the database directory.
+# WARNING: It must match clamd.conf's directive!
+# Default: hardcoded (depends on installation options)
+DatabaseDirectory /var/lib/clamav
+
+# Path to the log file (make sure it has proper permissions)
+# Default: disabled
+UpdateLogFile /var/log/clamav/freshclam.log
+
+# Maximum size of the log file.
+# Value of 0 disables the limit.
+# You may use 'M' or 'm' for megabytes (1M = 1m = 1048576 bytes)
+# and 'K' or 'k' for kilobytes (1K = 1k = 1024 bytes).
+# in bytes just don't use modifiers. If LogFileMaxSize is enabled,
+# log rotation (the LogRotate option) will always be enabled.
+# Default: 1M
+#LogFileMaxSize 2M
+
+# Log time with each message.
+# Default: no
+#LogTime yes
+
+# Enable verbose logging.
+# Default: no
+#LogVerbose yes
+
+# Use system logger (can work together with UpdateLogFile).
+# Default: no
+LogSyslog yes
+
+# Specify the type of syslog messages - please refer to 'man syslog'
+# for facility names.
+# Default: LOG_LOCAL6
+LogFacility LOG_MAIL
+
+# Enable log rotation. Always enabled when LogFileMaxSize is enabled.
+# Default: no
+#LogRotate yes
+
+# This option allows you to save the process identifier of the daemon
+# Default: disabled
+#PidFile /var/run/freshclam.pid
+
+# By default when started freshclam drops privileges and switches to the
+# "clamav" user. This directive allows you to change the database owner.
+# Default: clamav (may depend on installation options)
+DatabaseOwner clam
+
+# Initialize supplementary group access (freshclam must be started by root).
+# Default: no
+#AllowSupplementaryGroups yes
+
+# Use DNS to verify virus database version. Freshclam uses DNS TXT records
+# to verify database and software versions. With this directive you can change
+# the database verification domain.
+# WARNING: Do not touch it unless you're configuring freshclam to use your
+# own database verification domain.
+# Default: current.cvd.clamav.net
+#DNSDatabaseInfo current.cvd.clamav.net
+
+# Uncomment the following line and replace XY with your country
+# code. See http://www.iana.org/cctld/cctld-whois.htm for the full list.
+# You can use db.XY.ipv6.clamav.net for IPv6 connections.
+#DatabaseMirror db.XY.clamav.net
+
+# database.clamav.net is a round-robin record which points to our most
+# reliable mirrors. It's used as a fall back in case db.XY.clamav.net is
+# not working. DO NOT TOUCH the following line unless you know what you
+# are doing.
+DatabaseMirror db.ch.clamav.net
+DatabaseMirror db.local.clamav.net
+
+# How many attempts to make before giving up.
+# Default: 3 (per mirror)
+#MaxAttempts 5
+
+# With this option you can control scripted updates. It's highly recommended
+# to keep it enabled.
+# Default: yes
+#ScriptedUpdates yes
+
+# By default freshclam will keep the local databases (.cld) uncompressed to
+# make their handling faster. With this option you can enable the compression;
+# the change will take effect with the next database update.
+# Default: no
+#CompressLocalDatabase no
+
+# With this option you can provide custom sources (http:// or file://) for
+# database files. This option can be used multiple times.
+# Default: no custom URLs
+#DatabaseCustomURL http://myserver.com/mysigs.ndb
+#DatabaseCustomURL file:///mnt/nfs/local.hdb
+
+# This option allows you to easily point freshclam to private mirrors.
+# If PrivateMirror is set, freshclam does not attempt to use DNS
+# to determine whether its databases are out-of-date, instead it will
+# use the If-Modified-Since request or directly check the headers of the
+# remote database files. For each database, freshclam first attempts
+# to download the CLD file. If that fails, it tries to download the
+# CVD file. This option overrides DatabaseMirror, DNSDatabaseInfo
+# and ScriptedUpdates. It can be used multiple times to provide
+# fall-back mirrors.
+# Default: disabled
+#PrivateMirror mirror1.mynetwork.com
+#PrivateMirror mirror2.mynetwork.com
+
+# Number of database checks per day.
+# Default: 12 (every two hours)
+#Checks 24
+
+# Proxy settings
+# Default: disabled
+#HTTPProxyServer myproxy.com
+#HTTPProxyPort 1234
+#HTTPProxyUsername myusername
+#HTTPProxyPassword mypass
+
+# If your servers are behind a firewall/proxy which applies User-Agent
+# filtering you can use this option to force the use of a different
+# User-Agent header.
+# Default: clamav/version_number
+#HTTPUserAgent SomeUserAgentIdString
+
+# Use aaa.bbb.ccc.ddd as client address for downloading databases. Useful for
+# multi-homed systems.
+# Default: Use OS'es default outgoing IP address.
+#LocalIPAddress aaa.bbb.ccc.ddd
+
+# Send the RELOAD command to clamd.
+# Default: no
+#NotifyClamd /path/to/clamd.conf
+
+# Run command after successful database update.
+# Default: disabled
+#OnUpdateExecute command
+
+# Run command when database update process fails.
+# Default: disabled
+#OnErrorExecute command
+
+# Run command when freshclam reports outdated version.
+# In the command string %v will be replaced by the new version number.
+# Default: disabled
+#OnOutdatedExecute command
+
+# Don't fork into background.
+# Default: no
+#Foreground yes
+
+# Enable debug messages in libclamav.
+# Default: no
+#Debug yes
+
+# Timeout in seconds when connecting to database server.
+# Default: 30
+#ConnectTimeout 60
+
+# Timeout in seconds when reading from database server.
+# Default: 30
+#ReceiveTimeout 60
+
+# With this option enabled, freshclam will attempt to load new
+# databases into memory to make sure they are properly handled
+# by libclamav before replacing the old ones.
+# Default: yes
+#TestDatabases yes
+
+# When enabled freshclam will submit statistics to the ClamAV Project about
+# the latest virus detections in your environment. The ClamAV maintainers
+# will then use this data to determine what types of malware are the most
+# detected in the field and in what geographic area they are.
+# Freshclam will connect to clamd in order to get recent statistics.
+# Default: no
+#SubmitDetectionStats /path/to/clamd.conf
+
+# Country of origin of malware/detection statistics (for statistical
+# purposes only). The statistics collector at ClamAV.net will look up
+# your IP address to determine the geographical origin of the malware
+# reported by your installation. If this installation is mainly used to
+# scan data which comes from a different location, please enable this
+# option and enter a two-letter code (see http://www.iana.org/domains/root/db/)
+# of the country of origin.
+# Default: disabled
+#DetectionStatsCountry country-code
+
+# This option enables support for our "Personal Statistics" service. 
+# When this option is enabled, the information on malware detected by
+# your clamd installation is made available to you through our website.
+# To get your HostID, log on http://www.stats.clamav.net and add a new
+# host to your host list. Once you have the HostID, uncomment this option
+# and paste the HostID here. As soon as your freshclam starts submitting
+# information to our stats collecting service, you will be able to view
+# the statistics of this clamd installation by logging into
+# http://www.stats.clamav.net with the same credentials you used to
+# generate the HostID. For more information refer to:
+# http://www.clamav.net/support/faq/faq-cctts/
+# This feature requires SubmitDetectionStats to be enabled.
+# Default: disabled
+#DetectionStatsHostID unique-id
+
+# This option enables support for Google Safe Browsing. When activated for
+# the first time, freshclam will download a new database file (safebrowsing.cvd)
+# which will be automatically loaded by clamd and clamscan during the next
+# reload, provided that the heuristic phishing detection is turned on. This
+# database includes information about websites that may be phishing sites or
+# possible sources of malware. When using this option, it's mandatory to run
+# freshclam at least every 30 minutes.
+# Freshclam uses the ClamAV's mirror infrastructure to distribute the
+# database and its updates but all the contents are provided under Google's
+# terms of use. See http://code.google.com/support/bin/answer.py?answer=70015
+# and http://safebrowsing.clamav.net for more information.
+# Default: disabled
+#SafeBrowsing yes
+
+# This option enables downloading of bytecode.cvd, which includes additional
+# detection mechanisms and improvements to the ClamAV engine.
+# Default: enabled
+#Bytecode yes
+
+# Download an additional 3rd party signature database distributed through
+# the ClamAV mirrors. Here you can find a list of available databases:
+# http://www.clamav.net/download/cvd/3rdparty
+# This option can be used multiple times.
+#ExtraDatabase dbname1
+#ExtraDatabase dbname2

pykolab.dsc Changed